System information

Begin configuring the slave Black Widow(s) by pressing any button on the
slave when it is displaying this screen (above). When the button is pressed
a node (18 - 64) will turn green, indicating that the slave was detected and
configured as “On-Line.” Continue configuring slave Black Widows, one at a
time, until they are all configured and on line.
Returning to the Master Machine you will see all Black Widow and Galaxy
slaves showing as an On-Line node (green). Press the DONE button at this
time to finish the process.
You can view your new configuration without making any changes by choos-
ing View Arachnet Configuration or continue to press either bottom button
to exit the menu system.
Advanced
8.10
Black Widow slaves show this
screen while the Master
Machine is detecting Galaxys.
After detecting Galaxys each
slave Black Widow will show
this screen.
(Described Below)