System information

At this point you will see the Galaxy Nodes (1 - 16) turn red, in sequence,
as the Master Machine examines each node to see if it exists on the net-
work. The node number of any Galaxys on the network will turn Green, indi-
cating that the node was found and properly configured. When all Galaxys
are detected the following screen will display:
Networking
8.9
Reconfiguration will begin by
detecting any Galaxys on the
network.
(Described Below)
If there are no other Black
Widows on the network -
Press DONE.
If there are other Black
Widows present - continue as
shown below.
If there are only Galaxys connected to the Black Widow or the machine is a
stand-alone unit, press DONE to finish the reconfiguration process. If other
Black Widows are connected to the Master Machine, do not press
DONE at this time. The slave Black Widows must be configured as shown
on the next page.