System information

Running Reconfigure Arachnet
Prior to running Reconfigure Arachnet, perform the following tasks:
! Manually set the Node number of each Galaxy machine connected to the
network.
! Reboot all the machines on the network (turn them off and then back on).
At the Master Machine, press the Test/Setup button, choose Modem and
Arachnet Setup then choose Arachnet Setup. You are given two options
on this screen (Figure 8.7): Reconfigure Arachnet and View Arachnet
Configuration.
Advanced
8.8
Figure 8.7
Choose this option to run
Reconfigure Arachnet.
Reboot all machines on the
network and then press YES
to continue.