System information

Once the NIC has been physically configured, it is ready for installation in
the machine as follows:
1. Disconnect all relevant cables and power cords connected to the CPU.
2. Remove the CPU from the cabinet.
3. Locate the first card slot on the right side of the CPU case. This is the
preferred location for the network card.
4. Remove the corresponding slot cover from the chassis. Unscrew the
retaining screw that secures the slot cover and pull the slot cover out of
the chassis. Keep the slot cover retaining screw nearby.
Networking
8.3
Figure 8.1
Network Interface Card
Arachnid Part No. 41233
Note: The location of COM IN
and COM OUT may be
reversed on some network
cards. Follow the markings
printed on the card.