System information

! It is run manually by the user.
Warning: Changes to the BIOSsettings can severely affect the Black
Widow’s performance! Refer to the Main Board Manual
shipped with each machine to familiarize yourself with the
use of the setup utility before attempting any changes. If in
doubt about how to proceed, contact Arachnid Technical
Support for assistance.
To manually run the setup utility:
! Turn off the machine.
! Connect a keyboard to the CPU.
! Turn the machine on and press the “DEL” or “Delete” key when
prompted on the screen.
A current list of BIOS settings and instructions can be obtained by visiting
Arachnid’s website on the Internet at:
http://www.bullshooter.com
From Arachnid’s home page, choose Techsupport and click the Technical
Bulletins button. Under the Black Widow folder, open and view the file
BIOS.txt to determine which .pdf file applies to your BIOS version.
Video Monitor
The Black Widow is equipped with a 19-inch VGA color monitor. The moni-
tor may be removed for service by disconnecting the power and signal con-
nectors and sliding the unit forward and out of the cabinet.
A power saving feature is built into the Black Widow’s software that blanks
the video screen outside of the location’s Hours of Operation. The loca-
tion’s hours of operation are entered into the machine’s setup (see page
4.13) and outside of these hours the video will be blanked out. Inserting a
coin or pressing any button will override this feature.
Refer to the monitor service manual, shipped with each machine, for details
on service and adjustment.
Caution! A video monitor is a source of dangerously high voltage
(greater than 24,000 volts). It should be serviced only by a
qualified service technician.
Technical
T2.8