System information

Display Segment Hit Counters
This option will display the number of times each segment has been hit
since the counters were last cleared. The information is split into three
screens. The Next button will sequence through the screens. The last
screen contains the Exit button.
Clear Segment Hit Counters
This option is used to clear (zero) the hit counters described above.
Segment Test
Selecting this option will bring up the following screen:
While this screen is displayed, any segment on the dart head that is hit will
be displayed. The display shows which specific segment has been hit and
whether it was on the right side or left side dart head.
Further information on troubleshooting scoring and dart head problems can
be found on page T2.9, under Smart Target Interface Board.
Test Menu
T1.9
Segment Test Screen
(Described Below)