CLASS # 44 SUPER VIEW DIGITAL CALIPER This is similar to a dial caliper except it displays in a digital, easy to read format. It displays either inches or millimeters at the push of a button. There is a button for automatic zero and it has a resolution of 0.1mm/0.01” with an accuracy of plus or minus one thousandth of an inch or 0.2 mm. The unit is powered by a silver oxide battery, that will last for years, and it has a low battery warning.
CLASS # 44 41 PC. TAP & DIE SET For threading repairs in machinery and other metal projects, these tap and die sets are perfect for autos, motorcycles, general shop, farm, and home use. Features both national coarse and national fine threads, or metric coarse and metric fine threads. Made of high alloy steel. This set includes 17 taps and 17 of the equivalent hexagonal solid dies up to 1/2”.
CLASS # 44 45 PC. JUMBO TAP & DIE SET Made of heat treated and tempered Tungsten steel, this ‘Jumbo’ tap and die set covers both National coarse and National fine thread ranging up to 1” in SAE (Standard American Equivalent) or Metric coarse and Metric fine up to 24mm. Includes taps and equivalent dies.
CLASS # 44 TITANIUM 45 PC. JUMBO TAP & DIE SET Titanium coated tungsten steel dissipates heat 7 times faster than regular Tungsten steel, which extends the life of the tool. This ‘Jumbo’ tap and die set covers both National coarse and National fine thread ranging up to 1” in SAE (Standard American Equivalent) or Metric coarse and Metric fine up to 24mm. Includes taps and equivalent dies.
CLASS # 44 HI-CARBON TAP TAP & DIE SETS These 37 piece tap and die sets are made of high carbon tool steel. Plug taps are furnished in each set and the dies are hexagon style. They are available in SAE and metric and they include the T-handle tap wrench and come in a sturdy plastic case. 37 PC. MASTER METRIC HEX DIE SET Set Contains: Hi-Carbon Steel Plug Taps and Hex Die Sizes: 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00, 8mm x 1.25, 9mm x 1.00, 9mm x 1.
CLASS # 44 ARROW WELDING MAGNETS These handy magnets are powerful ‘helping hands’ when welding pieces of materials together. They’re used in many welding, soldering or assembly projects and can even be used as ‘floaters’ to separate piled steel plates. Also used with a shop crane to lift material and transfer it these magnets are available in 25 lb, 50 lb, and 75 lb strengths and are configured with 45°, 90°, and 135° angles both inside and outside. They can lift and hold any type of ferrous metal.
CLASS # 44 VICTOR TYPE WELDING KIT This ‘Victor’ type welding kit contains everything needed, except the gas and tanks. For welding, cutting or as a torch, this professional quality kit will weld to 1/4” thick and cut up to 1/2” thick with the tips included but with the addition of optional tips available anywhere, this outfit can weld up to 1-1/4” and cut up to 6” thick. Interchangeable with Victor® brand welding attachments and is UL listed and approved. Imported.
CLASS # 44 SLIDE HAMMER PULLER SET Eases removal of flange type axles, oil seals, bearings and other press fit parts. The jaws can be set up for either 2 or 3 jaw internal or external pulling for inside or outside pulling of gears. Also includes a puller hook for general pulling as well as a standard dent puller end so that you can easily do body panel repairs. You can even thread a vise-grip wrench to the end and use that as a universal puller.
CLASS # 44 BALL JOINT SERVICE KIT This is a 3-in-1 service kit for removing and installing press fit parts such as ball joints, universal joints, and truck brake anchor pins. This heavy duty set contains a ‘C’-frame press with a 12” forcing screw and 3 receiver tubes; 2-3/4” ID x 3” OD, 2-1/4” ID x 2-1/2” OD, and 1-3/4” ID x 2” OD. Includes two installation and removing adaptors. Removes even the most rusted and corroded parts and makes brake work and front end jobs a snap.
CLASS # 44 BEARING RACE & SEAL DRIVER SET This bearing race and seal driver set will save time and will also protect those expensive bearing jobs. It is designed to make it easier to insert wheel bearing race and seals without damage to race and axel housing. This set includes nine disc sizes to fit most wheel bearings, then turn disc over to drive seals. Comes complete in a rugged blow mold carrying case for convenient storage and retrieval. Machined aluminum construction. Import.
CLASS # 44 BEARING SEPARATOR PULLER KIT This bearing separator kit allows the user to quickly and efficiently dismount various machine parts attached to shafts. This kit includes a bearing separator and bolt, 4 main rods, a beam and a center bolt and is rated at 5 tons. Includes a rugged blow mold carrying case. Includes: Bearing separator and bolt: 30mm~50mm w/ bolt: 3/8” x L n120mm x 24T & 50mm~75mm w/ bolt 1/2” x L 135mm x 20T 4 pc. main rods 1 pc.
CLASS # 44 COMPRESSION TEST KIT One of the easiest and important ways to test an engine’s health is by checking its compression. That can be accomplished with this complete compression test kit that detects worn piston rings, cylinders, damaged valves and blown head gaskets. Simply test compression by threading the appropriate hose and adapter into the spark plug hole. The impact resistant gauge measures up to 300 PSI and the hoses and adapters will fit any engine.
CLASS # 44 AIR CONDITIONER MANIFOLD GUAGE This air conditioner manifold gauge set is vital when recharging the air conditioning system in trucks and cars. The red and blue air hoses connect to the high and low pressure Schrader valves on the engine manifold and the yellow hose connects to an external pump for evacuating the system and then to the coolant canister for recharging.
CLASS # 44 AVIATION TIN SNIPS Professional quality, aviation type tin snips with drop forged, alloy steel blades that are hardened and tempered for strength and durability. The heat treated handles come with a safety latch lock and feature color coded vinyl grips with thumb stops to prevent slipping. All three snips are 10” long. They will cut up to 18 gauge sheet metals, copper, tin or brass and the 3 piece set includes a left cutting, right cutting and a neutral (straight cutting).
CLASS # 44 BOLT CUTTERS Heavy duty, chromium molybdenum, (also known as ‘Chrome Moly’), is a general purpose steel that doesn’t easily corrode or deform under stress or harsh working conditions. The use of Chrome-Moly in these bolt cutters will assure that they perform well under rigorous applications. They have a short and very hard cutting edge to accommodate chain link, high grade bolts, reinforcing rods, and the high test rods used in pre-stressed concrete. They meet or exceed U.S.
CLASS # 44 HEX KEY SETS 25 PC. HEX KEY SET Chrome vanadium steel with black nitrate finish. Vinyl pouch included. Long Arm SAE Sizes 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16” and 3/8" Short Arm Metric Sizes 0.05, 1.27, 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8 and 10mm ITEM#: 669 10 PC. METRIC T-HANDLE HEX KEY SET Color coded, PVC handles on 6” long chrome vanadium steel keys with a black nitrate finish. Metal stand included. Sizes: 2, 2.5, 3, 4, 4.5, 5, 5.
CLASS# 44 6 PIECE JUMBO HEX KEY WRENCHES This is a 6 piece set of ‘L’ shaped ‘Allen’ type hex keys in the large sizes for big cap bolts and machine hex bolts. They are made from heavy duty, black finish chrome vanadium steel and super heat treated for durability and strength. They are available in both SAE (Standard American Equivalent) from 3/8” to 3/4” and in Metric from 8mm to 19mm.
CLASS # 44 PUNCH & CHISEL SETS 12 PC PUNCH & CHISEL SET Specifications: ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ Drop Forged CR-V Steel Heat Treated and Tempered 6 Chisels: 1/2”, 3/4”, 7/8”, 3/4”, 13/16”, 1” 3 Tapered Punches: 1/8”, 3/8”, 1/4” 2 Center Punches: 5/16”, 1/4” 1 Pin Punch: 3/8” Length: 6 1/2” to 10” 1 Vinyl, See-Through Carrying Pouch ITEM#: 667A DESCRIPTION: 12 PC.
CLASS # 44 NUMBER & LETTER DIE PUNCH SET This 36 piece punch set features large 1/4” numbers, letters and the ‘&’ sign for stamping names, words, birthdays and more into metal. Personalize pieces made of copper, silver, brass and more! The set includes 26 letter punches (A through Z) 9 Number Punches (0-9) use the ‘6’ punch upside down for a ‘9’, and 1 ‘&’ symbol punch .The pieces come in a durable plastic box that will hold all of the punches perfectly when not in use.
CLASS # 44 12 PC. FILE ASSORTMENT This 12 piece universal file set includes a file for almost any application in either wood or metal. Each file is heat treated and case hardened steel and made to withstand the harshest abuse, year after year.
CLASS # 44 4 PC GEAR PULLER SET This complete set of reversible gear and bearing pullers can be used for pulling either inside the gear or clamped over the outside of the gear. The set features a full range from 3”, which can be used as a bearing puller, up to an 8” that will open up to cover a 17” gear. It can be adjusted longer or shorter for a reach of 2-3/4” to 10-1/2”. They’re heat treated and hardened to withstand great pressure without the center post pulling apart from the jaws.
CLASS # 44 3 WAY POWER HAND STAPLER This handy stapler has 1,001 uses. It's perfect for screen repair, carpeting, upholstery etc. The heavy duty spring action drives the staples for a secure hold and the safety bar prevents accidents when not in use. Uses standard 5/32” ~ 9/16” staples, 3/8” ~ 9/16” round staples and even 5/16” ~ 9/16” nails. Comes with starter box of above staples. Perfect for any carpenter. Imported.
CLASS # 44 2 - WAY HAND RIVETER This two way hand riveter can be used in either a horizontal position or vertically which will allow for the best pressure in any confined space. They’re made of heavy gauge, heat-treated steel with vinyl grips and a highly polished, chrome head. The spanner wrench, used to change the rivet heads is kept inside one of the handles and the 4 heat-treated interchangeable dies store conveniently on the outside of the handle.
CLASS # 44 4 PC. ‘C’ CLAMP SET This set of four ‘C’ clamps is constructed of cast steel and heat treated for strength and durability. They have heavy duty sliding ‘T’ handles and screw shafts and the anvil and tip base are perfectly aligned to hold material firmly. Each set contains one each of 3”, 4”, 6”, and 8” and all clamps meet U.S. Federal specs GGG-C-406D. Excellent for professional use. Imported ITEM#: 647 DESCRIPTION: 4 PC.
CLASS # 44 30 PC. COMBO HEX KEY SET This is a 30 piece set of ‘Allen’ type hex key wrenches in a convenient, compact case. They are made from industrial quality vanadium steel with the black anodized chrome finish and the set includes the ‘Long Arm’ SAE sizes as well as the ‘Short Arm’ Metric sizes. There are 15 sizes in metric from .07 mm to 10 mm and 15 of the SAE sizes from .028 of an inch to 3/8”. IMPORTED ITEM#: DESCRIPTION: N102 30 PC.
CLASS # 44 PRY BARS & WRECKING BARS 4 PC. PRY BAR SET This 4 pc. pry bar set is heat treated and case hardened for strength. They’re unbendable under extreme pressure. They have tough, two-fisted handles on the ends made of heavy duty, impact plastic. Set includes one each of an 8” x 9/32”, 12” x 3/8”, 18” x 7/16”, and 24” x 7/16”. ITEM#: 660 DESCRIPTION: 4 PC.
CLASS # 44 2 PC. NUT SPLITTER SET This handy tool is used to crack or split a nut that is stripped or stuck on to a bolt due to age, corrosion or rust. It has a fully hardened, steel chisel that is driven by a large screw, and a drop forged, chrome vanadium steel body. Simply place the splitter head over the nut and turn the chisel bolt with an adjustable, boxed, or ratchet wrench and socket. This will drive the chisel through the side of the nut splitting it to the threads of the bolt.
CLASS # 44 SOCKET WRENCH ACCESSORIES 9 PC. WOBBLE EXTENSION SET • • • • • • For getting into deep, hard to reach areas Heat treated, chrome vanadium steel 3 Drives: 1/4”, 3/8” and 1/2” Each drive has 3 different lengths: 3”, 6” and 9” Socket end wobbles for the best angle to fit any application Imported ITEM#: 690 ____________________________ 3 PC.
CLASS # 44 DOUBLE SHELF UTILITY CART Features a sturdy, 1” square tube frame, and measures 34” high, 16” wide, and 30” long. It has two 3” deep shelves that can be positioned at the middle, bottom, or top of the frame. The baked on enamel shelves are not hung on inserts like the cheaper carts but instead are bolted through the frame on all four corners, so they will not sag or buckle under the weight of tools or parts.
CLASS # 44 VIPER 18 DRAWER TOOL CHEST This is an exceptionally heavy duty and slick looking tool chest. It has a .08mm steel shell with 1.0mm steel drawers and full width aluminum drawer pulls. It is powder coated with a glossy, jet black finish that gives this chest a great look and feel. It comes in two sections; a 9 drawer, 41” wide chest that sits perfectly on top of the 9 drawer, 42” wide rolling cabinet. Together, this unit is 42” wide and 5’ tall on its four 5” x 2” casters.
CLASS # 44 VIPER 11 DRAWER TOOL CHEST This is an exceptionally heavy duty and slick looking tool chest. It has a .08mm steel shell with 1.0mm steel drawers and full width aluminum drawer pulls. It is powder coated with a glossy, jet black finish that gives this chest a great look and feel. It comes in two sections; a 5 drawer, 28” wide chest that sits perfectly on top of the 6 drawer, 29” wide rolling cabinet. Together, this unit is 29” wide and 5’ tall on its four 5” x 2” casters.
CLASS # 44 INSPECTION TOOL SET These four inspection tools are telescopic like an auto antenna to reach into small, dark spaces and includes a small, led flashlight on an extendable arm to light up hidden areas in tight work spaces. This set includes an alligator clip on an extendable arm to assist in wiring jobs, a mirror on an extendable arm that rotates 360° and angles to any view, even around corners, and a powerful magnetic pickup tool that will easily lift up to a two pound item.
CLASS # 44 ‘F’ BAR CLAMPS Used mainly for woodworking but perfect for any clamping project. They are made with cast steel heads, heat treated for strength and durability and a rugged wood handled turning screw. The bar is tempered and nickel plated steel and they are available in various bar lengths to accommodate any sized project. Imported.
CLASS # 44 ROYAL RED SHOP RAGS These shop rags are 15” by 15” square, just the right size for normal clean up of small spills and other shop accidents. Also known as “grease getters”, these shop rags are 100% pre-washed cotton and super absorbent. They have hemmed edges so there’s no lint or fraying even after multiple washings and they’ve been pre treated to be super absorbent, yet release the grease, dirt, and grime when they’re washed.
CLASS # 44 48 PC. DRILL ACCESSORY KIT A great accessory kit for any woodworker. 48 drill bits, forstner bits, plug cutters, countersinks, power bits, and stop collars plus a hex key and a quick connect all in a convenient, blow mold carrying case. Imported. • • • • ITEM#: 994 Includes: 8 Plug cutters • 7 Drill bits 8 2” Power bits • 7 Stop collars 7 Countersinks • 1 Hex key 7 Forstner bits • 1 Quick connect DESCRIPTION: 48 PC.
CLASS # 44 6 PC. WORM GEAR HOSE CLAMP SET Hose clamps are used for fastening and tightening a hose onto fittings such as a barb or a nib. They’re used in radiator shops and auto, truck repair shops for fastening radiator hoses, heater hoses, bypass hoses, etc. This ‘worm gear’ clamp set contains 2 each of 2-1/4” maximum x 1 5/16” minimum, 1-1/4” maximum x 1/2” minimum, and 5/8” maximum x 7/32” minimum diameters. They are not stainless steel. Imported.
CLASS # 44 SOLDERLESS TERMINAL KITS Zinc plated sheet insulated with plastic, these solderless terminal kits are used by electricians, auto repair shops, audio installers, or anyone who needs a clean, solid wire contact without having to deal with solder. 360 PC SOLDERLESS TERMINAL KIT (Large Terminals) ITEM#: TK360 Contents: 20 pcs .157 Bullet (16 - 14 ga.) 20 pcs .157 Female Bullet (16 - 14 ga.) 20 pcs Quick Splice Connectors 20 pcs 10/32 Ring (16 - 14 ga.) 20 pcs 1/4” Ring (16 - 14 ga.
360 PC SOLDERLESS TERMINAL KIT (Smaller Terminals) ITEM#: 670 This is an all purpose kit in a very handy, plastic, sectioned container. There are 360 of every type of electrical terminal needed. Contents: 75 pcs 10 Spade (2.5) 75 pcs 10 Spade (1.5) 75 pcs Ring (2.5) 75 pcs Ring (1.5) 20 pcs Male (1.5) 20 pcs female (2.5) 10 pcs Butt Connectors (1.5) ¾ 10 pcs Butt Connectors (2.
CLASS # 44 HAND IMPACT DRIVERS & BITS HAND IMPACT DRIVER Easily loosen stubborn screws, nuts, bolts, etc. with this manual, hand held impact driver. Simply add the appropriate bit, Philips, flat, hex, or socket, then place on item to be loosened and strike with a hammer. Heavy, steel construction with knurled sections for better grip. Available in 3/8” and 1/2” drive and includes two Philips and two flat bits. Import.
CLASS # 44 28 PC. DRIVER BIT SET This Chicago Power Tools™ driver bit set includes all the bits you’ll need for a variety of jobs in the shop, garage or home. They are heat treated for maximum durability and store neatly in a folding carry case. Set includes 18 driver bits, 9 nut drivers and a magnetic bit holder.
CLASS # 44 JUMBO ‘T-HANDLE’ HEX KEY SETS These large, 5 piece ‘T’-Handle Hex Key wrenches are made from heat treated, extruded, alloy steel with a black oxide finish for durability. Rubber coated ‘T’ handles provide increased turning power with a comfortable, sure grip. The handles are color coded, red for SAE and blue for metric, and have the sizes clearly stamped for easy selection. Both sets come complete with a heavy duty, vinyl pouch for storage. Imported.
CLASS # 44 MULTI-PURPOSE ALUMINUM LADDER This amazing, multi purpose ladder folds into four sections with three steps per section for a total of 12 steps at an extended length of 12.4’. It has auto locking hinges at each extension so it can be safely extended to its full capacity. The multi position, articulating hinges allow it to be folded into several different configurations including a traditional 6 step, ‘A’ shape ladder, a 12’ extension ladder, a stair scaffold, a platform and more.
CLASS # 44 AUTOMOTIVE TOOLS SPARK PLUG HOLE CHASER a High grade tempered steel a Double ended for both 14mm and 18mm threads a Use with 3/16” deep socket a Cleans dirt, carbon and metal products from spark plug holes assuring a firm, clean connection ITEM#: 771 FLAT TIRE REPAIR TOOL • Remove object from tire • Place rubber cement on reamer tool • • • • • Includes: Reamer Threader Rubber Cement Rubber plug strips • • Run reamer tool in and out of puncture Load eye of plugging tool with rubber plu
CLASS # 44 SUCTION CUPS These lightweight, multi-purpose suction cups are easy to use, and perfect for handling sheet metal, glass or any other non-porous material, like certain fiberglasse and laminates. The easy action lever simply flips over for suction power and then flips in reverse to release. The dual suction cup will handle up to 130lbs. with a cup diameter of 4-3/4”. The single cup holds up to 77lbs. and the cup diameter is 4-5/8".
CLASS # 44 36” BLOW MOLD CREEPER This is a 36” rolling creeper that auto mechanics use for sliding under a truck or automobile while doing repair work in the prone position. This is a heavy duty, plastic ‘blow mold’ construction. (Definition of ‘Blow Mold’: A polymer is extruded through a die, and then pinched off by a mold. The part is formed by air being injected into the mold cavity, forcing the polymer to contour to the cavity walls.
CLASS # 44 BATTERIES Alkaline batteries provide long-lasting service even at high-drain discharges and in extreme temperatures. Dependable even after 5 years' of shelf storage. Mercury-free formulation means that these batteries can be safely disposed of in regular landfills. Alkaline Batteries Heavy duty, long life batteries at a very inexpensive price. 1.5 V. Imported. Expocell Batteries ITEM#: DESCRIPTION: AAA AA C D 9V AAA (4 PK.) AA (4 PK.) C (4 PK.) D (4 PK.
CLASS # 44 BAR CLAMPS Strong, lightweight and rust resistant, the ‘Speedy Grip’ bar clamps from Neiko Tools make cabinet or other woodwork a breeze. Pistol grip clamping action allows for one handed operation with just a squeeze of the trigger and these clamps can easily be converted from clamp to spreader.
CLASS # 44 BONDO SPREADERS These bondo spreaders are simply hard plastic ‘blades’ that you use when spreading bondo (dent and hole filler), or glazing putty onto cars, boats, etc. They can also be used for spreading spackling on walls to cover holes. They are tapered to an edge to make the spreading smooth and have a hole in the upper middle for hanging. Packed 100 per box and sold by boxes only. Item # BS456 is a 3 pack that includes 1 each 4”, 5” and 6”. Imported.
CLASS # 44 6 PC. BRASS WIRE WHEEL SET Non sparking and softer than steel, brass wire brushes will not scratch soft metals such as gold, copper, bronze or brass and are ideal for surface prep or cleaning on these materials. Uses include burnishing, polishing, non sparking static removal, and some deburring. This assortment includes a 2” cup brush, one 2” wire wheel, two 1-1/2” wire wheels, a 2-1/2” wire wheel, and a 3” wire wheel and all on 1/4” shanks for easy use on drills and die grinders. Imported.
CLASS # 44 CHISEL SETS 3 PC. BEVEL CHISEL SET Features high carbon, tool steel blades that are hardened, tempered, ground, and honed and finished with a black oxide to prevent rust. The handles are high impact, virtually unbreakable polypropylene plastic. This 3 piece set features one each of a 1/2”, 3/4” and 1” wide beveled chisel and is manufactured in Sheffield, England. ITEM#: 673 DESCRIPTION: 3 PC. BEVELED CHISEL SET 8 PC.
CLASS # 44 WOODWORKING CHISEL SET This 9 piece chisel set is designed for fine wood work and suited for use by hand or with a mallet. Each chisel features an extra long handle and blade for increased leverage. The blades are chrome vanadium, solid forged steel for retentive blade edge and the handles are made of tough polypropylene. Sizes include 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/4” and 1-1/2” and the set comes in an aluminum carrying case. ITEM#: 849 DESCRIPTION: 9 PC.
CLASS # 44 METAL FISH TAPES Contractor’s flat metal fish tapes are encased in lightweight ABS, heavy, impact plastic housings with viewing holes to make it easy to see how much metal tape is left on the reel. They’re tough and durable and feature knurled handles that are easy on the hands.
CLASS # 44 GREASE GUNS Two, heavy duty, garage style grease guns that feature knurled housing for better grip and a screw in nozzle that can easily be removed and replaced with an optional flex hose for harder to reach fittings. Each gun takes a standard 14 Oz. grease cartridge which just drops into the chamber or they can be suction or bulk loaded from any available grease source, and with the smooth action of the lever or pistol grip, they’ll deliver a smooth flow of grease to any size zirc fitting.
CLASS # 44 MAGNETIC PARTS TRAY These little 5-1/2” x 9” metal parts trays have plastic coated, magnetic bottoms and will stick to any metallic areas such as a vehicle engine area, a tool box, shop cart or any other work place. They will hold small metal tools or parts such as nuts, bolts, screws, springs etc. The powerful magnets hold parts securely inside whether horizontal or vertical, even upside down! The plastic coating protects surfaces from being scratched or marred. Imported.
CLASS # 44 MICROMETERS AND CALIPERS 0” to 1” OUTSIDE MICROMETERS Rugged, forged steel frame with a one piece, hardened spindle and machined threads. The knurled thumb screw clicks when closed for accurate readings to 100,000ths of an inch. Also has a spindle lock for making multiple measurements or for transferring a measurement. The sleeve and thimble have a satin chrome finish as well as a non-slip knurling. Imported.
CLASS # 44 MISCELLANEOUS 22” MACHETE Straight out of the jungles of Central America, these authentic Panga type machetes are used by gardeners, well drillers, landscapers, excavators and surveyors. The wide blade is perfectly weighted for swinging, which greatly reduces fatigue and the wooden handles have been riveted 6 times to hold up under extreme use in any weather.
CARPENTER’S PENCILS These strong, long-lasting pencils are a favorite with carpenters and other construction companies. They are flat to prevent rolling, even on a sloped roof and the lead is made to withstand the heavy marking even on coarse wood. These pencils feature the Ace toll free number, are 7” in length and packed 72 per box. ITEM#: 139 DESCRIPTION: ACE CARPENTER’S PENCILS 2” PADLOCKS These imported padlocks are built to the same standards as ‘Master’ locks.
STEEL TRAILER AID Never let a flat tire ruin your day. A real handy, very simple device for all tandem axle vehicles such as a horse trailer, motor home or boat trailer. Simply position the Trailer Aid in the front or back of the good wheel, then pull forward bringing the good wheel onto the Trailer Aid. The flat tire can now be changed without using a jack even while your horse is still inside of the trailer! ITEM#: 333 DESCRIPTION: STEEL TRAILER AID MAGNETIC PICK UP TOOL A powerful 5 Lb.
CLASS # 44 POCKET KNIVES & SHARPENER EASY GRIP LOCK BACK KNIFE This knife is built incredibly rugged and features a tactile rubberized grip that resists slipping even when wet. The curve of the handle fits your palm perfectly and increases control. It has a stainless steel blade with a non-reflecting matte finish and dual thumb posts for ambidextrous, easy opening. Includes a durable, reinforced, ballistic nylon sheath with a snap closure. This knife measures 8-1/2” long when opened and 4-3/4” when closed.
CLASS # 44 COLOR CODED NAIL SET This 3 pc. color coded nail set is made of hardened and tempered alloy steel with shock absorbing and knurled rubber grips to prevent slipping. They’re excellent for setting nails below the surface and include the three most popular sizes for almost any size nails. Includes one each of 1/16”, 1/32” and 3/32”. ITEM#: PGNS DESCRIPTION: 3 PC.
CLASS # 44 LIGHTED DIGITAL TIRE GAUGE Tires should be checked regularly to increase gas mileage and prolong the life of the tire. This digital tire gauge has a lighted tip to easily attach to the stem of the tire as well as a lighted dial to clearly see the reading. Features an automatic shutoff after 30 seconds of idle time and reads in PSI, BAR, and KPA. Sleek, ergonomic design with a ribbed, nonslip grip. For trucks, cars and cycles.
CLASS # 44 12 PC. FOLDING WRENCH & KEY SETS Made of chrome vanadium steel with anodized aluminum housings, these handy, little folding hex key and folding wrench sets come on a hanging belt clip and fold like a Swiss Army knife. There are two sets in each kit and each clip carries six folding hex keys in both metric and SAE or with Philips and flat screwdrivers and Torx bits. All four of the hanging sets are color coded for easy reference. Import. 12 PC. FOLDING HEX KEY SET • 6 pc.
CLASS # 44 76 PC. HEXAGON TAP & DIE SET Made of heat treated and tempered Tungsten alloy steel, this 76 piece tap and die set covers National coarse and National fine threads and contains 34 taps and 34 hex dies. Set includes two screwdriver pitch gauges, two ‘T’-handle tap wrenches, one 5/8” hex die handle, a 1/8” to 1/2” capacity tap wrench, screwdriver and it all comes in a heavy duty blow mold carrying case. Import. Metric Sizes: (size x thread) 3 x 0.5, 4 x 0.7, 4 x 0.75, 5 x 0.8, 5 x 0.
CLASS# 44 LARGE SCREEN DIGITAL CALIPERS Neiko instruments are precision ground to exacting standards and used by engineers all over the world. These digital calipers have the extra large, easy to read 38mm x 14mm LCD screen and read in both metric and SAE. They have fluid resistant stainless steel frames with a jaw depth of 15/16” inside and 1-9/16” outside.
CLASS # 44 300 Lb. CAPACITY PVC UTILITY CART These carts will haul around up to 300 lbs of material with ease on their 4” heavy duty, rubber castors which are all ball bearing, and have the ‘foot push’ lock down levers, so the cart stays where you put it, loaded or not. The body is 100% heavy duty, hard PVC, which is very sturdy under any conditions, and absolutely dent-proof.
CLASS # 44 STEEL TOOL BOX Homak® tool boxes are designed for the professional as well as the home handyman. This 24” tool box features industrial quality steel construction on the body, frame, drawers and lid as well as the included tool tray. It has a brown, wrinkle finish powder coated paint finish that resists rust, corrosion and harsh weather conditions and a triple clasp system to keep lid securely closed. Homak® tool chests are made for maximum durability.
CLASS # 44 18 DRAWER TOOL CHEST BLACK WIDOW This is an exceptionally heavy duty and slick looking tool chest. It has a .08mm steel shell with 1.0mm steel drawers and full width aluminum drawer pulls. It is powder coated with a glossy, jet black finish that gives this chest a great look and feel. It comes in two sections; a 9 drawer, 41” wide chest that sits perfectly on top of the 9 drawer, 42” wide rolling cabinet. Together, this unit is 42” wide and 5’ tall on its four 5” x 2” casters.
CLASS # 44 BLACK WIDOW 14 DRAWER TOOL CHEST This awesome tool chest was designed and manufactured exclusively for Ace Industrial Supply and carries the raised panel ‘Black Widow’ logo on both the top and bottom cabinets. It features 14 smooth gliding drawers and a sleek, glossy jet black powder coated finish. There is plenty of storage space in the wide drawers for a variety of tools and parts including a locking ‘whiskey drawer’ on the top section. (Insert your favorite libation here.
CLASS # 44 BLACK WIDOW JOB SITE BOXES These heavy duty job site boxes are made exclusively for Ace Industrial Supply under our Black Widow label. They are constructed of heavy reinforced steel with a rust resistant black powder coating and have recessed carrying handles. They have tamper-proof locks and heavy gauge skid bolsters for moving with a forklift and the lifting arms are smooth running and lock in place when lid is open.
CLASS # 44 STEEL TOOL BOX The Black Widow tool box is made exclusively for Ace Industrial Supply. It is constructed of heavy gauge steel and features 3 easy slide ball bearing drawers with foam liners. The top of the box has two storage trays and two latches to keep it safely shut and a built-in lock that latches from inside keeping all three drawers and the lid securely locked. Specifications: Width: 20.5” Height: 11.8” Depth: 8.6” Weight: 18.6 Lbs.
CLASS # 44 76 PC. HOME REPAIR TOOL KIT This handy kit has all the essential tools needed for home repairs and everyday projects together in a canvas tote bag. Includes a 13oz. claw hammer, 16’ tape measure, long nose pliers, adjustable wrench, bit driver, 9” level, snap blade knife, assorted picture hangers, fasteners, 1/4” drive sockets and 1” driver bits.
CLASS # 44 200 PC. HOME REPAIR TOOL KIT This is a complete kit for almost any home repairs. It features a wide assortment of tools in a folding carrying case. Includes highly polished chrome vanadium SAE and metric sockets in both 3/8” and 1/4” drive, a 13oz.
CLASS # 44 PIPE CUTTERS 3” CAPACITY PIPE CUTTER This heavy duty, contractor’s grade pipe cutter will cut any type of metal pipe for any construction application, up to 3” in diameter. Features a rugged, malleable steel frame, heat treated alloy steel cutting wheel and two facing flare groove collars. A large PVC ‘T’-handle feed knob allows for easy adjusting and user comfort. Weighs 18 Lbs.
CLASS # 44 PIPE THREADING KITS These two enclosed ratchet pipe threading kits have a capacity of up to 1” or the larger kit with a 2” capacity, suitable for installation and maintenance of pipe from 1/4” all the way up to 2”. Constructed of high grade alloy steel which is heat treated to a hardness rating of ‘Rockwell 60’. Each clearly marked chaser is mounted clockwise into the die head in numerical order and can be reversed to accommodate a bent or short pipe.
CLASS # 44 PUTTY KNIVES Also called ‘filling knives’ they are used by painting contractors and drywall contractors as well as plasterers for spreading spackling compound, putty, plaster or sealants of any kind over holes or cracks. Simply put they’re spatulas with PVC handles and flexible metal blades available in 6 different widths that can be used for spreading or scraping material.
CLASS # 44 WINDOW SCRAPER & CARPET KNIFE PRO GRADE WINDOW SCRAPER This pro grade window scraper is very handy for removing paint, putty, labels, adhesives, and other items from mirrors, windows, tiles and other flat surfaces. The blade guard acts as a scraper and it accepts standard utility knife blades. It is made from heavy duty plastic and has one utility blade enclosed.
CLASS # 44 POLY SAND BAGS & BAGGER These are the toughest poly bags on the market for filling with sand for use during a flood or other emergencies. They’re made from a tough, woven polypropylene material that is tested to 1,600 hours of Ultra Violet light as well as other severe weather conditions and will not break down over long periods of use. They’re 14” x 26”, have a pull-tight draw string to prevent leaking, and are approved by fire departments and the F.E.M.A. emergency agencies.
CLASS # 44 NYLON SPRING CLAMPS Nylon spring clamp jaws maintain very strong clamping pressure. The pivoting tips of these clamps stay square on the work and apply even pressure and they are perfect for hobbies, crafts, woodworking, shop, garage and hundreds of other uses. They have comfortable, non slip handles and available in 2” or 3” jaw capacity. Constructed of tough nylon and carry a manufacturer’s lifetime warranty.
CLASS # 44 37 PC. TAP & DIE SET When you need the best, these are the professional standard for taps and dies. They are American made from the toughest carbon steel, then precision ground and heat hardened. Manufactured by Vermont American®, one of the top machine tool companies in the Country. Each tap and each die has the size and starting side permanently marked on it. All of the taps are plug style and have the recommended drill size laser etched on the side.
CLASS # 44 WELDING MAGNETS QUICK RELEASE WELDING MAGNET • • • • • Easy on/off switch for quick release of magnet Work on angle, round, or square stock 45 Lb. capacity Hold at 45° or 90° angle Imported ITEM#: WMAG1 ADJUSTABLE ANGLE WELDING MAGNET • • • • • Ideal for welding and assembly applications 360° swivel angle Each magnet holds up to 50 Lbs. 2-1/2” x 3-1/2” ceramic magnet Imported ITEM#: WMAG2 4 PC. MINI MAGNET SET • • • • • High gloss enamel end plates Compact design 10 Lb.
CLASS # 44 WINCHES This 12 volt winch will run off your car or truck battery and pull up to 1,500 lbs., which is enough to get a vehicle up on a trailer or out of a ditch. It can be mounted on a bumper, on the back of a truck or on a trailer, and is great when mounted on a dock for pulling in a boat. They are not intended for overhead hoisting. They’re equipped with 5/16” x 25’ steel cable and the power leads are 6’ in length. Also features a remote switch for operating winch from a distance.
CLASS # 44 WIRE BRUSHES WOOD HANDLE TOOTHBRUSH ITEM#: 679 • • • • • Wood Handle 7 x 3 rows of wire bristles 8” long Hanging hole on handle Imported PLASTIC HANDLE TOOTHBRUSH ITEM#: 678 • • • • • Plastic Handle 7 x 3 rows of Stainless wire bristles 8” long Hanging hole on handle Imported WOOD SHOE HANDLE BRUSH ITEM#: 668 • • • • • • ITEM#: 679 678 668 Hardwood Handle 10 x 5 rows of wire bristles 10” long Hanging hole on handle Tapered handle fits palm and reduces fatigue Imported DESCRIPTION: WOOD HA
CLASS # 44 HARDCORE WIRE BRUSH These wire brushes make easy work of the most demanding projects. The rust resistant wires are staple set in an ergonomically designed block, made to maximize paint removal and surface preparation with minimal effort. The block is constructed of sturdy foam plastic which provides strength and light weight. The bristles are 4 x 19 rows of extremely rigid wire ready to take on the heaviest job, and they feature a 3” wide steel scraper.
CLASS # 44 BARREL PUMP These barrel (drum) pumps provide a steady flow of oil, diesel fuel, gas, or other non-corrosive liquids from almost all containers with a 2” bunghole. The bung adaptor is adjustable for various heights and the pump has a 40”L by 1-1/8”D suction pipe with a 1” outlet. Dispenses about 10 GPM (gallons per minute) and is bi-directional. Just turn the handle a few times to prime the pump or to act as a siphon. Made of cast iron for handling petroleum products and light oils.
CLASS # 44 TIRE GAUGES TRUCK TIRE GAUGE These are heavy duty, 12” tire pressure gauges for trucks. They have an angle head to assist the proper flow of air to the tube stem, no matter how bent or deformed. They read from 10 to 160 PSI in 2 lbs. and units on the reverse side read from 60 to 1100 KPA in 20 KPA units. They are chrome plated and have a sliding steel ring on them, so that they can be hung anywhere. They’re calibrated to 50 lbs. PSI.
CLASS # 44 120 PC. AUTO FUSE ASSORTMENT These are the newer type of fuses that have been used in most vehicles, both foreign and domestic, since 1980. They have the two flat prongs with a plastic, color coded head. This kit has 20 each of the 6 most often used fuses: 5, 10, 15, 20, 25, & 30 Amp. They are all separated in a convenient plastic storage case and are color coded for easy replacement. Don’t be caught on the road without them! Import. ITEM#: FUSE DESCRIPTION: 120 PC.
CLASS # 44 120 PC. MINI FUSE ASSORTMENT This 120 piece set contains the seven most commonly replaced fuses in today’s cars, trucks and SUV’s. These are mini fuses; 10.9 x 3.6 x 16.3 mm and are color coded for easy identification. A divided plastic storage box is included. These are mini fuses and are smaller than standard auto fuses. They are not to be confused with ‘low-profile’ fuses which have a much shorter blade length. Contents: (10) 5 amp (10) 7.
CLASS # 44 100 PC. ANCHOR KIT These all purpose plastic wall anchor kits include 100 plastic anchors, 100 1-1/4” x #10 self tapping screws and a 1/4” carbide masonry bit in a divided plastic box. They are very simple to use; just drill a 1/4” hole in the wall with the 1/4” bit, included, insert the anchor and the screw. As the screw is tightened, the anchor spreads apart on the opposite side of the wall making a sturdy mount that will not pull out.
CLASS # 44 108 PC. HEX SHANK DRIVER BIT SET This 108 piece hex shank driver bit set has all the bits you’ll ever need all in one handy assortment. Made of tough, chrome vanadium steel and comes in an 18 compartment, ABS plastic box. Import. Includes: • • • • • • ITEM#: BITS Phillips: 6 each #1, #2 and #3 head Slotted: 6 each 4.5mm, 6mm and 7mm Torx: 6 each T10, T15, T20, T25, T30 &T40 Pozi-Driv: 6 each Pz1, Pz2, and Pz3 Hex: 6 each 4mm, 5mm and 6mm Plastic divided organizer case. DESCRIPTION: 108 PC.
CLASS # 44 110 PC. HYDRAULIC GREASE FITTINGS This is a big assortment of the most popular grease fittings for almost any application. All fittings are heat treated, plated and polished to prevent corrosion and rust. 110 fittings in all in a divided, plastic storage box. Imported. SAE Includes: • • • • • • • 30 Pc. - Straight 1/4”-28 15 Pc. - 45° 1/4”-28 15 Pc. - 90° 1/4”-28 15 Pc. - 90° 1/8”-NPT 15 Pc. - 45° 1/8”-NPT 20 Pc.
CLASS # 44 17 PC. AUTO LAMP BULBS These are the most popular bulbs for almost any automotive application. They are the bayonet type, replacement bulbs for turn signals, back up, tail light, and interior vanity lights, like in the glove box and interior door lights. INCLUDED: All 12 Volt bulbs: (2) #53, (2) #57, (2) #194, (2) #67, (1) #1003, (1) #1073, (1) #1141, (1) #1034, (2) #1157, and (3) #2057 ITEM#: LAMP DESCRIPTION: 17 PC.
CLASS # 44 LOCK NUTS & WING NUTS 150 PC. LOCK NUT ASSORTMENT The nylon inserts inside these steel lock nuts assure a secure, tight fit on high vibration areas, vehicles, small engines, etc. Includes plastic divider box. Sizes: (25) #10-24, (35) 1/4”-20, (25) 1/4”-28, (30) 5/16”-18, (25) 3/8”-16, (10) 1/2”-13 150 PC. WING NUT ASSORTMENT These high grade wing nuts are easy to use, simply tighten them by hand, no tools needed. Includes plastic divider box.
CLASS # 44 MINI TORCHES BUTANE MICRO TORCH This butane micro torch will heat up to 1,300° Celsius (2,370° Fahrenheit). It’s great for melting gold, silver or copper and can be used for bending plastic pipe or fusing metal plastic, or rubber materials. They are used in emergency soldering, electronic repair, jewelry repair and around the house, or for camping or barbeque. It is refillable with any butane and has a burn time of up to 3 hours when full.
CLASS # 44 MISCELLANEOUS AUTOMOTIVE STEERING WHEEL LOCK These keyed locking bars attach to any vehicle’s steering wheel to help prevent opportunity theft. They are completely adjustable to fit any type steering wheel and made of heavy duty, quality steel covered with PVC to prevent marring. They are impervious to sawing or grinding through yet simple to install and remove. Includes 2 keys. Import. ITEM#: COP MECHANIC’S SONARSCOPE This is a stethoscope for mechanics.
CLASS # 44 48 PC. POWER BIT SET This is the most useful set of driver, drill, and socket bits that you’ll ever own. Includes all the popular sizes of phillips, hex, torx and square drive bits all 2” long, as well as 7 nut driver bits from 3/16” to 7/16”, 5 drill bits from 1/16” to 3/16”, three 1/4” screw finders, a 4” extension holder, and one 1/4” drive, 2” socket adaptor. All 48 bits are neatly stored in a heavy duty, plastic carrying case that’s easy to keep organized.
CLASS # 44 HOBBY KIT & GLUE GUN This hobby kit by Homak® has everything you need for crafting packed in a sturdy, compact carrying case that measures 11-3/4” x 9”. The kit includes an electric glue gun with glue, a 5-in-1 hammer with a screwdriver set, small and large handle hobby knives, a spring clamp, tweezers, sanding block, 22 specialty blades, an edger and a planer.
CLASS # 44 WIRE BRUSH SET - 38 PC. This 38 piece industrial wire brush set is used for cleaning and polishing a variety of different materials. Ideal for machining and auto repair, opening clogged parts, scouring cylinder head volt holes, removing the bead sealing area of oxidized aluminum rims, or cleaning corroded light sockets, pipes, battery terminal clamps and even guns.
CLASS # 44 8’ CHARMING WINDMILL These are 8’ high, steel replicas of real working windmills seen on farms and in yards across America. They are real working, whisper quiet, and the perfect decorative touch to any garden or yard. Twelve durable steel blades in an old world design are plated for lifetime resistance to outdoor elements.
CLASS # 44 TOOL POUCHES, BELTS & KNEE PADS These tool pouches and belts are designed for professionals and made to last for years. They’re constructed of rugged polyester fabric with heavy duty steel rivets and nylon stitching as well as hard molded pockets that keep a firm hold on tools job after job. Perfect for electricians, drywallers, lathers, maintenance experts and contractors. 21 POCKET ELECTRICIANS POUCH • Double layer of rugged, lightweight 600D polyester fabric.
MEDIUM ZIP TOP UTILITY POUCH • Double-pull zipper cover secures parts and tools while able to accommodate longer items. • Snap-back feature helps keep cover out of the way. • Slots, sleeves and straps to accommodate a variety of hand tools. • ‘J’-clip, tape strap, and measuring tape clip. • Clip on or fits belts to 2-3/4” wide ITEM#: CLC1524 15 POCKET CENTER TRAY TOOL BAG • 13-1/2” x 9” multi-compartment plastic tray included, stored in middle compartment for easy access to the rest of bag contents.
23 POCKET 5 PC. COMFORTLIFT BELT • Made of double layered 600D polyester fabric. • Completely adjustable, padded suspenders engineered to hold and distribute weight comfortably. • Easy Carry Handle design provides for simple adjustments and easy storage without spilling contents. • One size fits most. ITEM#: CLC1614 18 POCKET CARPENTER’S COMBO • Easy Carry Handle design provides simple adjustments, easy carrying and storage of apron without spilling contents.
CLASS # 44 EMERGENCY LED LIGHT & RADIO This amazing emergency light needs no batteries. Simply turn the crank handle for one minute and the LED light will remain lit for up to 30 minutes or the radio will play for 10 to 12 minutes allowing for emergency broadcast information or any other AM or FM radio broadcast.
CLASS # 44 VARIOUS ASSORTMENTS These are various assorted kits for automotive and machine repair shops. They have universal applications for almost any business, home, farm, or a variety of other uses. Hobbyist cannot be without these, especially those who collect and race slot cars, model airplanes etc. 555 PIECE COTTER PIN SET Cotter pins are for holding linkage and armatures together and are also used for wheel bearings.
CLASS # 44 VARIOUS ASSORTMENTS 150 PC HAIR PIN ASSORTMENT These are also known as ‘Hitch Pins’ or ‘Quick Release Cotter Pins’ Also another popular fastener for machine repair of all kinds and hobby shops. Sizes: 5/32” x 2-5/16”, 9/64” x 13/4”, 3/64” x 1-5/8”, 5/64” x 15/16”, and 3/32” x 1-3/16” ITEM#: HAIR _____________________________________________ 315 PC ROLL PIN ASSORTMENT These are press fit into parts to hold them together.
____________________________________ CLASS # 44 VARIOUS ASSORTMENTS 300 PC SNAP RING ASSORTMENT These are internal and external snap rings, also known as retaining rings. Auto repair, truck repair and machine shops use these frequently. Sizes: 1-1/4”, 1”, 13/16”, 7/8”, 9/16”, 7/16”, 5/16”, 5/8”, 1/4”, 3/4”, 1/2”, 3/8” ITEM#: SNAP _____________________________________________ 200 PC SPRING ASSORTMENT These are the most common springs in both the ‘push’ and the ‘pull’ styles.
CLASS # 44 VARIOUS ASSORTMENTS 720 PC. WASHER ASSORTMENT Zinc plated to prevent rust and this kit covers all the popular sizes for machine shops, auto, truck and boat repair shops.
CLASS# 44 WING NUTS / WIRE NUTS These Marrette twist on wire connectors are American made by Thomas & Betts the leading name in electrical connectors. Their unique inner spring and cap grip make them the first choice of professional installers across the country. The external cap is tough polypropylene and 105° ‘C’ rated to withstand incredible pressures. They have close-spaced, deep grooves for real twisting power, even with greasy or oily hands and have a deep, wide throat for total insulation coverage.
CLASS # 44 UNIVERSAL LOCKOUT TOOL Don’t get locked out of your vehicle again! This is an all in one Universal Lockout set just like the ones used by the Auto Club or the Repo Man. It is a complete set designed to work on most cars or trucks. The set includes the thin barwide bar, a wire form ‘S’ hook, a slide lock tool, a wonder tool, a plastic coat hanger, 2 piece wedges and a universal gas cap tool.
CLASS # 44 LOCKOUT TOOL INFLATABLE WEDGE This handy device is used in tandem with a universal lockout tool. Simply wedge the bag between the door and the door frame or the weather stripping and the window then squeeze the hand pump. This allows enough space to insert a lockout tool and easily unlock the door. Import.
CLASS # 44 PLASTIC KEY TAGS These plastic key tags are used to identify keys at auto shops, body shops and car and truck dealers. The self locking design keeps keys secure and they feature a large writing surface for easy marking and identification with ink or pencil. Holes are fully punched out, eliminating ‘chads’ and they’re perfect for quick tagging in busy service areas. Available in red, blue, white and yellow and packed 1,000 per box. Priced per 1,000.
