Specifications

Model Front Adjustable Width Rear Adjustable Width
Arm
Height
Weight
Ai1
Forks: 7” - 9”
Spools: 11”- 13.75”
Swingarm: 10.75” - 13.5”
13” 12 lbs
Ai1-XARM
Ai1 XARM Add-on Kit – Includes (2) L-Arm sections with wheels, (2)
bolts, (2) nuts, (2) washers and rubber coated knobs
13” 5 lbs
Model Description
Lift Arm
Height
Weight
BW-SIDE-STAND
Black Widow Single Sided
Swing Arm Stand
14.75” 9 lbs
BW-SIDE-PIN-25
Single Sided Swing Arm Stand Side Pin for Ducati
motorcycles - 25mm/21.7mm
BW-SIDE-PIN-27
Single Sided Swing Arm Stand Side Pin for Tri-
umph motorcycles - 27mm
BW-SIDE-PIN-28
Single Sided Swing Arm Stand Side Pin for Honda
motorcycles - 28mm
BW-SIDE-PIN-31
Single Sided Swing Arm Stand Side Pin for Honda
motorcycles - 31mm
BW-SIDE-PIN-40
Single Sided Swing Arm Stand Side Pin for MV
Augusta motorcycles - 40mm
BW-SIDE-PIN-53
Single Sided Swing Arm Stand Side Pin for BMW
motorcycles - 53mm
Model Color Weight
MC-STAND-B
Blue 10 lbs
MC-STAND-R
Red 10 lbs
MC-STAND-Y
Yellow 10 lbs
MC-STAND-G
Green 10 lbs
Model Description Size Weight
NR1127
Motorcycle Stand Kit –
Includes NR123, NR427 and
NR923
5.5” to 9.5” H x 24” to 39”
L x 36” W
40 lbs
NR123
Motorcycle Center Stand
5.5” to 9.5” H x 36” L x
5” W
20 lbs
NR427
Rear Wheel Roller 1.5” H x 10.25” L x 12” W 5 lbs
Page 9
Toll Free (800)-851-6396 · Fax- (314)-754-8180 · www.RagePowersports.com
Motorcycle Products : Stands
The Ai1 All in One Motorcycle Stand combines
a Rear Spool Stand, Rear Swingarm Stand, and a
Front Fork Stand together for one complete, easy
to use motorcycle stand. Using an interchangeable
attachment system, the Ai1 can be quickly re-congured to suit lifting a
motorcycle by the rear spools, rear swingarm, front forks, or front swingarm.
Simply slide the Ai1 Motorcycle Stand into place, push the
handle down to pivot along four 3” heavy duty caster wheels,
and the motorcycle lifts. An optional X-Arm kit is avail-
able including necessary ttings and two L-Arm sections
to enable use of two stands at once for lifting a motorcycle
completely o the ground. Innovative, lightweight, and
very portable.
All in One Motorcycle Stand
FEATURES:
» Lightweight, portable motorcycle stand system
» Includes Rear Spool Adapters, Swingarm Stand, and Front Fork Stand
» (4) 3” D heavy duty caster wheels
» Rubber stoppers prevent stand and surface abrasions
» Optional XARM kit allows the use of both stands at once
» Heavy duty steel tube construction
» Black semi-gloss powder coat
» Includes all necessary hardware for assembly and operation
Color Rear Swing Arm Stands
The standard rear swing arm motorcycle stands are available in four colors
to match the most popular sport bike factory colors. These rear swing arm
stands feature reversible rubber mounts and adjust to t swingarms from
9.25” - 11.75” (10” - 12.75” for spools.) 3” wheels and 1.5” tube construction
round out this rugged design for years of use at the shop or the track.
FEATURES:
» Thick 1.5” tubing
» 4 wheels with 3” diameter
» Red, Blue, Green, and Yellow available
» Lightweight at 10 lbs
» Reversible rubber mounts and spool attachments included
This rear motorcycle stand has a heavy duty, profes-
sional grade design that accommodates bikes with single
sided swing arms. An interchangeable pin system can
use a variety of side pins (sold separately) to work with
dierent motorcycles. Each side pin has two bear-
ings which allow the wheel to spin when lifted.
The stand features a 26” lifting handle for
easy operation and includes four 3”
wheels.
Black Widow Single Sided Swing Arm Stand
FEATURES:
» 1.25” heavy duty tubing with powder coat finish
» Lifts rear of motorcycle for servicing or storage
» Interchangeable side pin system (side pins sold separately)
» Side pins are mounted on bearings, allowing wheel to spin when lifted
» 26” lifting handle for 1 person lifting
» Four 3” caster wheels
» Stand may only be used on left side of bike
FEATURES:
» Heavy-duty cross-link system
» Threaded lift bar and pivot plate
» Adjustable lifting height 5-1/2”-9-1/2”
» 2” wide lift platform
» Steel construction and black powder coat finish
The NR1127 Motorcycle Center Stand is constructed of high-quality steel
and a heavy-duty black powder coat nish. The threaded lift bar and cross-
link system make getting a motorcycle o the ground
for maintenance or storage simple and easy. Only
a 3/4” socket and ratchet or wrench is needed
to adjust the 2” wide platform anywhere
between 5-1/2” to 9-1/2” in
height.
Motorcycle Center Stand and Jack