Specifications
Model Track Length Track Width
Ramp
Length
Weight
Weight
Capacity
AMC-400
75” 5.5” 45.5” 36.5 lbs 400 lbs
Model Track Length Track Width
Ramp
Length
Weight
Weight
Capacity
MX-600X
74.75” 5.5” 59.25” 64 lbs 600 lbs
Model Dimensions
Deck Extender
Length
Clearance
(Hitch to Carrier)
Weight
Weight
Capacity
410ACR
72” x 6” x 2” 36.75” 19” 47 lbs 400 lbs
Model
Track
Length
Track Width
Ramp
Length
Weight
Weight
Capacity
AMC-600-2
75” 5.5” 45.5” 69 lbs 600 lbs
Model Track Length Track Width
Ramp
Length
Weight
Weight
Capacity
SMC-600R
78.75” 8” 72” 99 lbs 600 lbs
Page 7
Toll Free (800)-851-6396 · Fax- (314)-754-8180 · www.RagePowersports.com
Motorcycle Products : Carriers
Our aluminum motorcycle carrier mounts right into a Class III, IV, or V 2” receiver
hitch. This device can carry up to a 400 lb motocross bike without the need for a
trailer or even a pick up truck. This all aluminum design is both economical and
lightweight. The system includes a loading ramp and also an anti-tilt locking
device to prevent sway of the carrier when it is loaded. The runged surface has a
16” opening for the front tire to simply
drop into and included attaching
points to tie down the bike
with straps.
The MX-600X carrier is constructed of steel and has a black powder coated nish
for protection. The carrier will t into a 2” Class III or greater receiver and includes
a 5’ long loading ramp which attaches to the carrier when not in use. The carrier
features integrated loops for tie down straps and
removable pins to adjust the size of the front
wheel channel from 8” - 12” for either a scooter
or dirt bike. Also included is an anti-tilt device
and pinch bolt to eliminate carrier wobble.
Tilt-a-Rack Powersport Carriers are designed for transporting most motor
scooters, motocross bikes, Vespas, and small motorcycles, with the exception
of the Honda Reex/Helix scooters. For easy loading,
these powersport racks tilt on an angle for access
without the need for ramps. For vehicles further
o the ground, the Tilt-a-Rack Powersport
carrier features a built-in deck extender to
reduce loading incline.
Load up and haul two dirt bikes with our hitch mounted double motorcycle
carrier. The AMC-600-2 is constructed of aluminum with a steel powder coated
main hitch tube for added support. An included ramp is used to load up bikes,
and when not in use, the ramp secures to the carrier. Included with the hitch
mounted carrier is a anti-tilt device
for extra stability. The carrier
can attach to 2” square Class
III, IV, or V hitch receivers.
The SMC-600R sport bike motorcycle carrier is designed to transport motorcy-
cles up to 600 lbs on a 2” Class III or greater hitch receiver. The carrier features
a 72” long ramp for loading and an integrated wheel chock for front
wheel stability. Durable, yet lightweight,
the carrier frame is constructed of black
powder coated steel while the carrier track
is constructed of aluminum. An included
anti-tilt device keeps the carrier stable.
FEATURES:
» Lightweight all aluminum design
» Fits in any 2” receiver
» Includes aluminum loading ramp
» Loading ramp attaches to carrier when traveling
» 2 integrated tie down loops
» Assembles in seconds
FEATURES:
» Durable steel frame with black powder coating
» Fits in any 2” receiver
» Includes 5’ loading ramp
» Loading ramp attaches to carrier when traveling
» Front tire cradle adjusts from 8”-12” for dirt bikes
or scooters
» 2 integrated tie down loops
» Pinch bolt removes receiver slack
» Designed for dirt bikes or scooter
FEATURES:
» Designed for transporting most motor scooters,
motocross bikes, Vespa, and small motorcycles (except Honda Reflex/Helix Scooters)
» Tilts on the passenger side for easy loading and unloading
» For 2” Class III/IV hitch receivers only
» Built-in deck extender to reduce loading incline
» Integrated tie-down points
» Locks in a level position for transport
» Works with most vehicles including some smaller SUV models
» All aluminum construction
FEATURES:
» Lightweight all aluminum design
» Fits in any 2” receiver
» Includes aluminum loading ramp
» Loading ramp attaches to carrier when
traveling
» 2 integrated tie down loops
» Designed for dirt bikes or motocross
bikes
FEATURES
» Durable steel black powder coated frame
» Aluminum carrier track
» Fits in any 2” Class III or greater receiver
» Includes 6’ loading ramp
» Loading ramp attaches to carrier when traveling
» Integrated wheel chock for added motorcycle
stability
» Anti-tilt device included for carrier stability
Aluminum Hitch Motorcycle Carrier
Steel Hitch Motorcycle/Scooter Carrier
Tilt-A-Rack Powersport Carrier
Double Hitch Motorcycle Carrier
Sport Motorcycle Carrier