Specifications

Specications
350ARV
Usable Deck Area 52” x 26” x 4”
Deck Extension 44.5”
Clearance (5/8” pin) 40.25” (unfolded), 14.25”(folded)
Clearance (1/2” pin) 38.875” (unfolded), 13”(folded)
Hitch Class 2” Class III (Class II with Adapter)
Max Hitch Height 14”
Weight Capacity 350 lbs
Weight 58 lbs
Specications
SC500-AF
Weight Capacity 500 lbs
Hitch Class III or IV
Usable Dimensions 46.5” L x 30.25” W
Ramp Dimensions 59.25” L x 28.25” W
Hitch Height 13” - 18”
Center of Pin Hole to Carrier 7.25”
Specications
SC400
Weight Capacity 400 lbs
Hitch Class III or IV
Usable Dimensions 47” L x 28” W
Ramp Dimensions 42” L x 27.5” W
Hitch Height 11” – 14”
Center of Pin Hole to Carrier
Length (unfolded)
5/8” Hitch Pin Hole: 14”
1/2” Hitch Pin Hole: 15”
Center of Pin Hole to Carrier
Length (folded)
5/8” Hitch Pin Hole: 6”
1/2” Hitch Pin Hole: 7”
Specications
SC500
Weight Capacity 500 lbs
Hitch Class III or IV
Usable Dimensions 48.25” L x 28” W
Ramp Dimensions 60” L x 27.5” W
Center of Pin Hole to Carrier
Length (unfolded)
13.875”
Center of Pin Hole to Carrier
Length (folded)
4.75”
Page 53
Toll Free (800)-851-6396 · Fax- (314)-754-8180 · www.RagePowersports.com
SC500-AF HItch Cargo Carrier
Mobility & Medical : Carriers
FEATURES:
» Designed for transporting powerchairs and mobility scooters with a vehicle hitch
» Tilts for easy loading and unloading
» Fits 2” Class III receivers (will work with Class II adapter)
» Folds vertical for storage against the vehicle bumper
» Solid deck surface with built-in deck extender
» Pinch-bolt attachment reduces rack swaying during travel
» Multiple tie-down points
Tilt-a-Rack Scooter Carriers are designed for transporting a powerchair or
mobility scooter using a vehicle’s 2” Class III hitch receiver. Each rack tilts
on an angle for easy loading and unloading
without the need for ramps. Between uses,
the Tilt-a-Rack folds vertical against the
vehicle bumper for storage and transport.
Tilt-a-Rack Carriers feature a built-in
deck extender to reduce the angle of
incline, a solid deck surface, pinch-
bolt attachment to eliminate sway
during use, and multiple tie-down
points for securing a powerchair
or mobility scooter easily.
Tilt-A-Rack Mobility Carrier
FEATURES:
» For use with 2” Class III or IV trailer hitches
» Folds up vertically for easier parking and maneuvering
» Large platform accomodates most power wheelchairs and scooters
» Folding ramp for loading and unloading
» Carrier constructed with heavy duty aluminum while the underside support tube and
brackets are made from reinforced steel with a gray powder coat finish
» Made with 4” wide raised-edge rungs spaced 1” apart
» Built-in eyelet tie-down points for safely securing load
» Contains 2 anti-rattle springs to reduce vibrations
» Includes an anti-tilt bracket to reduce carrier wobble and a 5/8” hitch pin
The SC500-AF is used for transporting power chairs, wheelchairs, and
scooters. This carrier ts into a 2” Class III or IV receiver hitch and can fold
up vertically out of the way when not in use. The SC500-AF has an attached
ramp that folds into three positions: down for loading/
unloading, upright for transport, and laid at on the
carrier for storage. The platform, ramp, rungs,
and rails are constructed with heavy
duty aluminum while the underside
support tube and brackets are made
from reinforced steel. Ramp rungs
are 4” wide and spaced 1” apart along
the ramp and platform with a raised-
edge to provide traction.
FEATURES:
» For use with 2” Class III or IV trailer hitches
» Large 47” x 28” platform accommodates cargo up to 27” W
» Folding ramp for loading and unloading
» Assembles with just a few bolts and standard hand tools
» Black powder coat finish
» Heavy duty steel construction with a thick steel mesh platform
» Included anti-wobble hitch collar minimizes carrier wobble
» Built-in tie-down points for easier securing of equipment
» Optional Swing Away Kit available to swing the carrier away from the rear
of the vehicle for easy access
FEATURES:
» For use with 2” Class III or IV trailer hitches
» Large 48.25” x 28” platform accommodates scooter up to 27” W
» Folding ramp for loading and unloading
» Assembles with just a few bolts and standard hand tools
» Black powder coat finish
» 10 built in tie-down points
» Heavy duty steel construction with a thick steel mesh platform
» Included anti-wobble hitch collar
» Optional Swing Away Kit available to swing the carrier away from
the rear of the vehicle for easy access
The SC400 hitch cargo carrier ts into a 2” Class III or IV receiver hitch. The
SC400 is used for transporting a wheelchair, scooter, small equipment, and
cargo. This carrier has a built-in ramp that can be
locked in place in an upright position or laid
at on the carrier. The hitch cargo carrier’s
heavy duty steel construction has a black
powder coat nish to give it a sleek look
and protect it from rusting.
The SC500 ts into a 2” Class III or IV receiver hitch. This carrier is used for
transporting a power wheelchair, scooter, or other equipment. For securing
cargo, 10 tie-down points are available along the sides. The SC500 heavy
duty steel construction has a black powder coat
nish to give it a sleek look and protect
it from rusting. A 60” loading ramp is
attached to allow a wheeled vehicle to
be easily pushed up onto the platform.
The ramp then folds up for transport.
When not in use, the ramp folds at
onto the platform and the carrier
folds up against the vehicle.
SC400 Hitch Cargo Carrier
SC500 Hitch Cargo Carrier