Specifications

Model Dimensions Channel Size Weight
Weight
Capacity
DH-HR-3
33-1/2” L x 12” W
x 4” H
3-3/4” D
(Master Stream)
27 lbs
20,000 lbs
per axle
Model Dimensions Tire Size Weight
Weight
Capacity
DH-WC-2
10” L x 7” W x 8-5/8” H Up to 41” D 13 lbs 40 tons
Model Dimensions Tire Size Weight
Weight
Capacity
DH-WC-3
12-3/4” L x 11-1/2” W x
10-1/2” H
41” D or
greater
23-1/2
lbs
120 tons
Model Dimensions Tire Size Weight
Weight
Capacity
DH-WC-1
9-7/8” L x 6-1/4” W x
7-1/4” H
Up to 44” D 6 lbs 40 tons
Model Dimensions Channel Size Weight
Weight
Capacity
DH-HCR4
33” L x 12” W x
5” H
3-1/2” D
(Master Stream)
42 lbs
20,000 lbs
per axle
Model Dimensions Channel Size Weight
Weight
Capacity
DH-HR-5
40” L x 11-1/2” W
x 5” H
4-1/2” D
(Master Stream)
47 lbs
20,000 lbs
per axle
Page 49
Toll Free (800)-851-6396 · Fax- (314)-754-8180 · www.RagePowersports.com
Supply Line Hose Ramp Hauler Truck Wheel Chock
Rubber Loading Dock Chock
Industrial Rubber Wheel Chock
FEATURES:
» Dual 3.75” D channels for hose suppy and/or master stream line protection
» Bridge design allows trucks to cross hoses without line interruptions or bulges
» Black thermoplastic rubber with bright reflective yellow safety strips
» Includes 2 connectors for connecting multiple ramps together
» 2 pre-drilled holes in the connectors for permanenet mounting
» Vehicles require at least 4” of clearance for proper use
FEATURES:
» Thermoplastic rubber construction
» Tread surface for extra grip
» Great for over-the-road hauler trucks with a max 40 ton capacity
» Stabilizes truck trailers to prevent vehicle rolling or shifting during docking
» Ideal in sloped surface loading dock environments
» Integrated carrying handle with pre-drilled 3/8” tie down hole
» Available in singles; recommended to be used in pairs to meet OSHA guidelines
FEATURES:
» Double-sided 67° chock is great for tandem wheels
» Integrated carrying handle can also be used for fastening
» Designed for use in a loading dock environment
» Tread surface provides added grip for tires up to 41” D
» Made from heavy duty thermoplastic rubber
» Available in singles; recommended to be used in pairs per OSHA guidelines
» Rated for over-the-road trucks with a max 40 ton capacity
FEATURES:
» Huge 120 ton capacity
» Thermoplastic rubber construction
» Built-in carrying handle
» Tread surface for a firm grip
» For 41” sized tires or larger
» Mounting point for rope or chain tie down
The DH-HR-3 is a dual 3-3/4” D channel hose ramp specically designed
to protect supply line and/or master stream hoses from interruptions or
bulges due to vehicle trac. Hose ramps can be bridged together with the
included connectors and surface mounted to prevent movement during
use. The ramp supports vehicles up to 20,000 lbs per axle and requires 4” of
clearance.
The DH-WC-1 chock prevents rolling or load shifting during loading and
unloading at sloped loading docks. The 37° slope with a tread surface adds
extra grip for tires up to 44” D. Features
an integrated carrying handle with a 3/8”
pre-drilled tie-down hole for rope or chain
attachment.
The DH-WC-2 chock eliminates truck trailer rolling or shifting during
loading and unloading at sloped loading docks. The double-sided 67° slope
grips tires up to 41” in size and works great with tandem
wheel congurations. Rated for use with over-the-
road trucks weighing up to 40 tons. Features an
integrated carrying handle which can also be used
for fastening with a rope or chain.
The industrial strength rubber wheel chock DH-WC-3 is designed for stabi-
lizing re trucks and commercial vehicles with a maximum 120 ton capacity.
The DH-WC-3 is made from thermoplastic rubber to resist fuel, oil, and
solvents. Features a surface tread which grips tires
41” or greater in size, a built-in carrying handle,
and a built-in mounting hole for rope or chain
tie-downs.
2-Channel Hose Bridge
Dual Channel Hose Ramp
FEATURES:
» Protects stream hoses up to 3-1/2” D
» Prevents stream lines from bulging when heavy vehicles run over the lines
» Black with bright yellow reflective safety strips
» Made with heavy duty thermoplastic rubber
» Includes 6 safety yellow reflective strips, 4 glass bead reflectors and 2 ramp connectors to
attach multiple ramps together
» Works great inside and outside at a warehouse, construction site, or on a fire call
» Vehicles require at least 5” of clearance for proper use
FEATURES:
» Designed for 4-1/2” diameter hose lines
» Vehicles require at least 5” of clearance for proper use
» Made from black thermoplastic rubber with bright reflective yellow safety strips
» Includes 2 connectors with pre-drilled holes so multiple ramps can be permanently
mounted together
The heavy duty dual channel DH-HCR4 encloses stream hoses up to 3-1/2”
in diameter, preventing bulges that are created by heavy trac running
over the lines. The DH-HCR4 is 5” high and each side has steps which
increase at 1” increments that feature reective yellow safety strips and
glass bead reectors that provide greater visibility in low light conditions.
Works great inside and out at ware-
houses, construction sites, or on
re calls.
The 2-channel DH-HR-5 is designed to hold hose lines with a 4-1/2” diam-
eter, allowing vehicles with at least a 5” clearance to drive over the ramp,
reducing the chances of hose bulges. Constructed with industrial strength
thermoplastic rubber that supports up to 20,000 lbs per axle. Includes
two connectors so ramps can be connected side to side to cover more
area. Connectors have
pre-drilled holes to
permanently mount
ramps together.
Industrial Products