Specifications

Model Dimensions Channel Heights
Channel
Width
Weight
Weight
Capacity
DH-UP-8
24” L x 42” W x
2-1/2” H
3/4”, 1-1/8”,
1-1/4”
1-1/8”
44
lbs
600 lbs
Model Dimensions Weight Weight Capacity
KR01
18.8” W x 16.1” L x 4.3” H 30 lbs 20 tons
Model Dimensions Weight Weight Capacity
DH-UP-5
11-3/4” L x 20” W x 5-1/4” H 25 lbs 40,000 lbs
Model Ramp Type Dimensions Weight
Weight
Capacity
DH-UP-4
Middle
10-1/8” L x 23-3/4” W x
3-1/2” H
18 lbs 5 tons
DH-UP-
4-END
End
10-1/8” L x 14” W x
3-1/2” H
3-1/2 lbs 5 tons
Model
Curb Ramp
Style
Dimensions Weight
Weight
Capacity
KR30R
Straight 11.8” L x 23.5” W x 3.9” H 24 lbs 30 tons
KER30R
Corner 11.8” L x 11.8” W x 3.9” H 8 lbs 30 tons
KR36R
Straight 14.12” L x 23.5” W x 5.9” H 35 lbs 30 tons
KER36R
Corner 14.1” L x 14.1” W x 5.9” H 14 lbs 30 tons
KR45R
Straight 17.7” L x 23.5” W x 7.8” H 66 lbs 30 tons
KER45R
Corner 17.7” L x 17.7” W x 7.8” H 31 lbs 30 tons
Page 48
Toll Free (800)-851-6396 · Fax- (314)-754-8180 · www.RagePowersports.com
Threshold Ramp
FEATURES:
» Provides a transition to elevated surfaces up to 2-1/2”
» Textured surface for traction
» Works great for pedestrian traffic, wheelchairs, power chairs, and scooters
» 3 channels for running cables, wires, and hoses underneath
» Constructed with rubber for any weather condition
The DH-UP-8 provides a transition between elevated surfaces with up
to a 2-1/2” rise. Features a textured surface for traction and works great
with wheelchairs, power chairs, scooters, and
pedestrian trac. Includes
three channels to run
wires, cables, and hoses
beneath the ramp.
Heavy Duty Rubber Curb Ramp
FEATURES:
» Constructed of high density rubber
» Grooved surface for traction
» For indoor or outdoor use
» Massive 20 ton capacity
» May be permanently mounted using two front holes
Rubber curb ramps are a simple solution for accessing curbs or other small
steps in an industrial or commercial environment. Heavy duty, high density
rubber construction allow these ramps to handle up to 20 tons to accom-
modate the heaviest of industrial applications. A grooved surface provides
traction both indoors
and outdoors, and two holes at the front of the ramp
allow it to be permanently mounted.
Heavy Duty Kerb Ramp
FEATURES:
» Provides a 32° incline to a 5-1/4” rise
» Non-slip traction surface
» 4 pre-drilled holes for permanent mounting
» Vehicles require at least 5-1/4” of clearance for proper use
» Black heavy duty molded thermoplastic rubber
The DH-UP-5 works great in commercial areas and loading docks. The ramp
has a 20 ton capacity that provides a 32° incline permitting vehicles to tran-
sition between surfaces with up to a 5-1/4” rise. Includes pre-drilled holes so
ramps can be permanently mounted. Made with heavy duty molded ther-
moplastic rubber and features a non-slip traction
surface that provides added grip in
any weather condition.
Custom Curb Ramp
FEATURES:
» Provides a 20° incline
» Non-slip traction surface
» Black heavy duty molded thermoplastic rubber
» Vehicles require at least 3-1/2” of clearance for proper use
The DH-UP-4 and DH-UP-4-END provide increased access between surfaces
that have a dierence in elevation up to 3-1/2”. The middle DH-UP-4
provides a 20° incline and can be combined with the DH-UP-4-END end
caps to allow access from the side. Multiple ramps
can be t together to create a custom sized
ramp. Both are black with a non-slip trac-
tion surface made with heavy duty molded
thermoplastic rubber.
FEATURES:
» Huge 60,000 lb capacity
» High visibility reflective surface
» Ribbed for traction in all weather conditions
» Mounting holes for permanent applications
» Modular design with male/female connectors to create custom lengths
These modular curb ramp kits oer three heights of 23.5” wide ramp
sections with optional beveled ramp ends. The modular design allows
conguration of the ramp to meet the desired length of your specic appli-
cation. Their heavy duty 30 ton weight capacity allow these ramps to be
driven on daily by forklifts, construc-
tion equipment, heavy trucking, and
other industrial applications. The sloped
end sections allow vehicles to hit the
ramp from almost any angle. A solid solution
for ramping curbs or small rises for lighter applications
such as wheeled carts, bicycles, and lawn equipment, especially where
space is limited. A perfect solu-
tion for easy to set up temporary
ramping, and include cutouts for
permanent mounting.
Modular Curb Ramp Kits
Industrial Products