BLACK PEARL 7 ” H D S c r e e n F P V RC801 D i v e r s i t y R X Instruction Manual Before operating the unit,please read this manual thoroughly,and retain it for future reference.
Catalogue Safety Notice........................................................................................................................................................ 1 Warning ......................................................................................................................................................... 1 Battery ...........................................................................................................................................................
Safety Notice Warning ● In order to reduce the damage of fire, electric shock or product hazard, do not expose the unit to rain or moisture. ● ● Please use only the recommended accessories. Do not disassemble this product,it should be repaired by the professional people. Battery ● ● DO NOT dismantle the battery. DO NOT make the battery short or its terminals in touch with metal objects,there is explosion danger. ● ● DO NOT use any damaged or leaking battery.
Packing List ①Main Body ③Battery ⑥DC Input Cable ②Sun Shadow ④Antenna ⑤AV Cable ⑦DC Output Cab ２
Battery Battery Installation ● Push the battery socket with gold contacts toward the gold contacts of the battery compartment of the device,and press the battery down;when battery reaches the bottom of the battery compartment,the battery lock will fix the battery automatically. ● If you don’t install the battery, you can use 7～28V power supply.
Icons Function Icons Screen Icons ● ● There are different icons in different working modes. When battery icons shows as ,it means the batter need be recharged or changed.
Operation Instruction Power on/off ● Press the power button until the device is on,the red indicated light will be on. Working Mode ● Press mode button can set up: DIV、RX1、RX2、AV IN、HDMI IN model. ● Video TV system set-up(except HDMI mode): Press menu button to enter ‘function’,then ‘Video sys’ to choose PAL or NTSC. ● Under DIV、RX1、RX2 modes,you need press menu button first to enter RF to set up the frequency band to make sure,the device Work with the transmitter in the same band.
Function Instruction ZOOM Function ● Vertical Scaling Use this function, can make vertical scaling, only show 16:9 moving image region of 4:3 picture on the screen. Support shortcut keys:Long press < >button to ZOOM IN，long press < > button to ZOOM OUT(back to original scale) Attention: NOT Support HDMI video vertical scaling. For example: original scale ZOOM IN ● Horizontal Scaling Use this function, can make horizontal scaling, change input 4:3 image into 16:9 image displayed on the screen.
DNR When external signal is input,due to various reasons,for example: signal source is interference transmission line caused by EMI,which may cause more image noise and more serious picture ripples;set up DNR function can improve these phenomenas.When you set DNR to “High”,you Will reduce the noise to the maximum extent to improve the display effect. -When there is some serious noise interference, the DNR features may not function.
Menu (Works in black for explaining the menu function) Press button into menu setup;these menu consists of 4 directories:Color 、Audio、Function、 Wireless;Press button to enter settings,press or button to browse options and adjust value.
● Icon On、5 Sec、10 Sec、15Sec、20 Sec、25 Sec、30 Sec、35 Sec、40 Sec、45 Sec、 50 Sec、55 Sec、60 Sec set the status icon on the screen shown all the time or hidden automatically according to set time ● Video Sys PAL 、NTSC Wireless ● -Diversity band A、B、E、F ● -RX1 band A、B、E、F ● -RX2 band A、B、E、F Specification Diagonal Display Resolution Screen Contrast Luminance 7 inch 1024X600 700:1 300cd/㎡ ISM 5.
Weight Main body 350 g Battery 95 g Tripod connector Working Temperature General 1/4 "thread -10℃～+65℃ １０
