Instruction manual

9
EDGE 540 V3-30cc - Item code: BH94 . Instruction Manual
Secure.
1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
Throttle - cable
Throttle -
cable
5x 90mm
See pictures below:
INSTALLING THE ENGINE MOUNT.
Throttle servo
INSTALLING THE THROTTLE - CABLE.