Instruction manual

EDGE 540 V3-30cc - Item code: BH94 . Instruction Manual
24
1) Completely charge your transmitter and
receiver batteries before your first day of fly-
ing.
2) Check every bolt and every glue joint in
your plane to ensure that everything is tight
and well bonded.
3) Double check the balance of the
airplane.
4) Check the control surface.
5) Check the receiver antenna . It should
be fully extended and not coiled up inside the
fuselage.
6) Properly balance the propeller.
We wish you many safe and enjoyable
flights with your EDGE 540-V3 30CC.
PRE-FLIGHT CHECK.
1) We highly recommend setting up a
plane using the control throws listed.
2) The control throws should be meas-
ured at the widest point of each control sur-
face.
3) Check to be sure the control surfaces
move in the correct directions.
CONTROL THROWS.
Ailerons : 25mm up 25mm down
Elevator : 25mm up 25mm down
Rudder : 40mm right 40mm left
25mm
25mm
25mm
25mm
40mm
40mm