Instruction manual

EDGE 540 V3-30cc - Item code: BH94 . Instruction Manual
14
INSTALLING THE SPINNER.
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 8mm machine screws.
 1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the
servo into the servo tray.
 2. Mount the servo to the tray using the
mounting screws provided with your radio
system.
INSTALLING THE ELEV ATOR
SERVOS.
Secure.
Front view
Secure