Instruction manual

EDGE 540 V3-30cc - Item code: BH94 . Instruction Manual
12
 4. Install the muffler and muffler extension
onto the engine and make the cutout in the
cowl for muffler clearance. Connect the fuel
and pressure lines to the carburetor, muffler
and fuel filler valve.
 2. While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the engine. The
front of the cowl should be positioned so the
crankshaft is in nearly the middle of the cowl
opening. Hold the cowl firmly in place using
pieces of masking tape.
 3. Slide the cowl back over the engine
and secure it in place using four wood screws.
 1. Slide the fiberglass cowl over the en-
gine and line up the back edge of the cowl with
the marks you made on the fuselage.
COWLING.
Top side
Trim and
cut
Bottom side.
Left side.
3 x 12mm
Machine screw.