Instruction manual

28
EDGE 540-V3- ITEM CODE: BH91. INSTRUCTION MANUAL



3. Position the battery pack and receiver
behind the fuel tank. Use two tie wraps to hold
the battery and receiver securely in place as
picture below.
Do not permanently secure the receiver and
battery until after balancing the model.



4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
Battery
Tie wrap.
Receiver
Locate the aluminium wing dihedral brace.
WING ATTACHMENT.
*** Test fit the aluminium tube dihedral brace
into each wing haft. The brace should slide in
easily. If not, use 220 grit sand around the
edges and ends of the brace until it fits prop-
erly.
See picture wing attach to fuselage.
Installing the fuselage hatch as same as pic-
ture below.
Right wing.
Wing bolt.