Specifications

MRQ300/350V Open-Convertible Installation Instructions
3
92-085 Rev 1 Mar2011
R
G
L
L
When the side panel is fully seated, the
top surface will be flush with the internal
welded flanges (A) and the 2 clearance
holes (O) in the panel will align with the
threaded holes (K) in the back plate. These
holes are for two #12-24 screws (L)
supplied to ensure structural integrity and
full security of the completed cabinet. If
required use a soft mallet or equivalent to
fully seat side panel so screws can be
installed. Repeat with other panel. Your
equipment can now be installed and
configured.
R
U
I