User Instructions

Black Dragonfly Agriculture Drone Instruction Book
11
9) Charger Maintenance and Cautions
(1) Parts Name
（2) Operation Instruction
1．Start and self inspect
Check all the wiring connections－confirm all is right－turn on main switch on charger－LCD screen 和
LED indicators will on light－At the same time, the buzzer is turned on. When the buzzer ends, the charger
completes normal startup and self inspection.
2．Work mode instruction
Charging mode：In this mode, the battery can be charged in a fast and balanced way；
Maintenance mode:when the battery is not used for a long time, it is recommended to maintain
The battery once every 15 days;In normal use, if the battery life is significantly reduced or the cell difference
exceeds 50mV,it is recommended to carry out maintenance operations;In the maintenance mode, the charger will
use a small current to charge , discharge and balance the battery , so as to adjust the voltage of each battery unit to
between 3.84-3.86V.
Continuous working mode:when the charging steward is connected, the host will automatically recognize and
switch to continuous working mode.
3．Work current setting
According to the battery capacity and actual use requirements, flip the current selector switch to the
corresponding gear to complete the current setting
4.In charging
Long press the charging button for more than 2 seconds,then enter into the charging mode or start