Indoor Fireplace User Manual

TC30.NGO3.C 100308
6
11. Install the center media spacer and secure
to the tray with two 1 1/2” screws.
(Fig. #11 & 12)
Three holes must line up to set each
screw.
12. Apply just enough glass media to cover
the burner assembly. (Fig #13 & 14)
NOTE: Too much glass media over the
burner will cause sooting with the use of
propane gas.
Fig #11
Fig #12
Fig #13
GLASS MEDIA PLACEMENT
CENTER MEDIA SPACER
FINISHED INSTALLATION
OF GLASS MEDIA
Fig #14