Installation guide

Chapter 2: BlackDiamond X8 Series Modules and Fans
BlackDiamond X8 Series Switches Hardware Installation Guide
24
I/O Module LEDs
LEDs on the front panel of the BlackDiamond X8 series I/O modules (Table 5) provide information
about the operating status of the module and ports.
Table 5: LEDs on the BlackDiamond X8 Series I/O Modules
Type Label/Function Color/State Meaning
Module
STAT
Module status
Green/blinking Normal operation.
Amber/blinking Configuration error, code version error,
diagnostic failure, or other severe
module error.
Off The module is not receiving power.
DIAG
Module diagnostics
Amber/blinking Diagnostic tests are in progress.
Amber/steady A diagnostic failure has occurred.
Off Normal operation.
Port
Port status Green/steady Link is up.
Green/blinking Port is disabled.
Amber blinking Packet activity on port.
Off Link is down.