Specifications
ExtremeXOS 12.3.4 Release Notes
81
PD4-909114333 When disconnecting a network login authenticated client who is connected through a
dynamically created network login VLAN, process mcmgr crashes and generates the
following log messages.
***** Process mcmgr pid: 518 died with signal:11
PD4-763062511 Hitless upgrade is not supported for network login in ExtremeXOS 12.3.1.
PD4-752731351 You should not be able to enable network login if a VLAN is a VLAN-aggregation
subVLAN. The system should generate a syntax error.
PD4-616376481 The following error message is displayed during NetloginMac_V2 regression after
rebooting a switch with the save option set to yes:
<Erro:HAL.Card.Error> MSM-A: Unable to remove broadcast MAC entry
for VLAN/VMAN while changing tag from 1 to 3999
PD4-468366251 A network login client is not authenticated if the username is 32 characters. Only 31
character user names are supported, even if the user can create a 32-character
username.
PD4-427423116 When a dot1x client is authenticated at multiple VLANs, the output of the show
netlogin port command shows the client is sometimes authenticated at the local
server and other times at a RADIUS server.
Note: This occurs when dot1x and MAC authentication are enabled on the port.
Network Services
PD3-166858162 On a Summit X250e-24x switch, if one of the combo ports is redundant to a front panel
port, after rebooting, the second combo port does not come up if the primary port for the
SRP is active.
PD3-93829391 Configurations using a VR-Mgmt interface as a RADIUS client IP may not load at boot-
up. However, using an interface in VR-Default will load correctly.
PD3-67431351 Configuring an ingress traffic queue and an egress traffic queue association to multiple
ports in sequential order generates the following error:
Egress queue already associated to this ingress queue
Configuration failed on backup MSM, command execution aborted!
PD3-67727590 Creating two sets of vMAN ACLs with 4000 entries each and performing a vMAN ID
translation on each ACL may generate the following error:
.....03/15/2006 17:57:28.84 <Info:pm.config.openingFile> MSM-B:
Loading policy RLL20k from file /config/RLL20k.pol
...03/15/2006 17:57:32.46 <Info:pm.config.loaded> MSM-B: Loaded
Policy: RLL20k number of entries 4002
.........Error in alloc txmi txmi 0x9f2 txmdi 0xffffffff
Error in alloc txmi txmi 0x9f4 txmdi 0xffffffff
Error in alloc txmi txmi 0x1102 txmdi 0xffffffff
Error in alloc txmi txmi 0x9f6 txmdi 0xffffffff
Error in alloc txmi txmi 0x9f8 txmdi 0xffffffff
OSPF
PD3-133427241 When an OSPF external filter is configured to deny routes, not all routes are being
filtered.
QoS
PD3-16578296 The member ports of a trunk will retain the QoS profile configuration of the trunk (based
on the master port) after load sharing is disabled, or if a port is removed from the trunk.
RMON
PD3-12950492 Issuing the clear counter command might cause a high number to be displayed in
variables such as etherHistoryOctets, etherHistoryPkts, and etherHistoryTable.
ScreenPlay
Table 38: Platform-Specific and Feature PDs (Continued)
PD Number Description