Specifications

ExtremeXOS 12.3.4 Release Notes
31
NOTE
Hitless upgrade from ExtremeXOS 12.0 and earlier to ExtremeXOS 12.1 and later is not supported on the
BlackDiamond 12800 switch.
ExtremeXOS Command Line Support
The following is true for all Summit X150 and X350 series switches:
● Summit X150 and X350 series switches do not support L3 functionality; this platform does not
support CLI commands for L3 functionality.
● Summit X150 and X350 series switches do not support stacking; all CLI commands for stacking are
not supported on this platform.
● Summit X150 and X350 series switches do not support IP forwarding; however, CLI commands that
configure IP addresses function in order to access the management functionality of the switch are
supported.
● Upgrade or trial licensing is not available on the Summit X150 and X350 series switches.
Unsupported Commands on the Summit X150 and
X350 Series Switches
Following is the list of processes that are not supported with an L2 Edge license.
● bgp
● msdp
● ospf
● ospfv3
● rip
● ripng
● pim
● vrrp
● brm
● upm
Table 36 lists the CLI commands not supported on the Summit X150 and X350 series switches.
Table 36: Summit X150 and X350 Unsupported Commands
Command Description
configure Configure running system information
ipforwarding Configure IP forwarding behavior
ipmcforwarding Configure IP multicast forwarding parameters
ipmroute IP multicast routing module