Specifications

Overview
ExtremeXOS 12.3.4 Release Notes
12
● AES 128 Bit Encryption Support for ExtremeXOS SNMPv3.
● BGP Commands
- disable bgp advertise-inactive-route
- enable bgp advertise-inactive-route
- disable bgp neighbor originate-default
- disable bgp peer-group originate-default
- enable bgp neighbor originate-default
- enable bgp peer-group originate-default
- configure bgp maximum-paths
- show bgp routes
- configure bgp add aggregate-address
- disable bgp export
- enable bgp export
● BGP Features
-BGP ECMP
- Blackhole Route Redistribution
- Default Route Origination and Advertisement
- Inactive Route Advertisement
- Support for Overlapping Aggregate Routes
● BlackDiamond 8800 series switches and Summit family switches now support a strict-priority mode
override for QoS profiles.
● BlackDiamond
®
20808 now supports:
- Anycast Rendezvous Point (RP)
- Connectivity Fault Management (CFM)
-CPU Monitor
- Dynamic Access Control List (ACL)
- Egress Mirroring
-Extreme Standby Router Protocol (ESRP) Redundant Access
- Hierarchical Quality of Service (H-QoS) Bandwidth Mode
- Hierarchical Virtual Private LAN Services (H-VPLS)
- Link Layer Discovery Protocol (LLDP)
- Multicast Source Discovery Protocol (MSDP)
- Multiprotocol BGP (MBGP)
- Multiprotocol Label Switching (MPLS)
- Fast reroute (FRR)
- LSPs and PWs over Link Aggregation Trunk Ports
- MPLS Label Experimental (EXP) Bit Replacement and Classification
- Resource ReSerVation Protocol-Traffic Engineering (RSVP-TE)
- Static Label Switched Paths (LSPs)
- Private VLAN and VLAN Translation
- Remote Mirroring
- Virtual Private LAN Services (VPLS) EXP bit examination and replacement