Specifications

ExtremeXOS 12.3.4 Release Notes
101
Resolved Issues in ExtremeXOS 12.3.2
The following issues were resolved in ExtremeXOS 12.3.2. The numbers shown in column one of the
following table are for internal reference and can be ignored. ExtremeXOS 12.3.2 includes all fixes up to
and including ExtremeXOS 11.1.4.4, ExtremeXOS 11.2.3.3, ExtremeXOS 11.3.4.5, ExtremeXOS 11.4.4.7,
ExtremeXOS 11.5.2.10, ExtremeXOS 11.6.5.3, ExtremeXOS 12.0.5, ExtremeXOS 12.1.3, and
ExtremeXOS 12.2.2-patch1-8. For information on those fixes, see the release notes for the specific release.
PD4-804341479,
PD4-796161449
System memory is depleted when non-ICMP IP packets are sent to a VRRP virtual IP
address.
Table 48: Platform-Specific and Feature PDs
PD Number Description
General
PD4-780238601,
PD4-500100211
The “vi” process may crash when performing a cut/copy/paste of text that is larger than
10,492 bytes.
PD4-762749887,
PD4-504813986
In a DNS server, if the RADIUS server IP address is specified as CNAME, that is, Alias, a
switch is not able to resolve the IP address correctly.
PD4-817311836,
PD4-507170653
Policy files containing 850 entries with flood-groups causes an Extreme Process Manager
(EPM) watchdog reboot.
PD4-776749028,
PD4-581257425
An error occurs when loading an ExtremeXOS 12.1 or earlier software configuration file if
the banner configuration contains a new line character.
PD4-772344728,
PD4-688252511
Some hosts are no longer reachable after removing an active MSM-B in a cross module
link aggregation setup.
Workaround: Disable and re-enable the load-shared port.
PD4-771508188,
PD4-699307521
When running the show ports stack-ports rxerrors command, the "RX Over" count
continuously increments, even without user traffic.
PD4-804106484,
PD4-774654053
A 10GE module fails silently followed by a silent MSM failover.
PD4-762749838,
PD4-541064246
When configuring rate-limiting on a switch, the max-burst-size value is not reset after
reconfiguring the switch.
PD4-778917991,
PD4-684400473
A switch does not generate high CPU utilization log messages after executing the clear
cpu-utilization command, even if process CPU utilization goes above the threshold
value.
PD4-713872481,
PD4-686876515
When broadcast IP forwarding is enabled on a default VLAN forwarding is disabled after a
system reboot.
PD4-778918231,
PD4-605137688
The drop counter for FDB entries is not updated and no log message is generated to
indicate a hash collision or table full error.
PD4-805462251,
PD4-701906049
Running the configure sys-recovery-level command resets a switch to the factory
default after disabling and enabling a G48Xa I/O module.
PD4-780725573,
PD4-779916611
When a static entry is added to a configured domain, the entry is also added to another
domain.
PD4-818402789,
PD4-772840867
An Extreme Networks switch ignores the string "priv_lvl" in a TACACS authorization reply
packet.
Table 47: Platform-Specific and Feature PDs (Continued)