Specifications

ENERGY MANAGEMENT
39
HAI LIGHTING CONTROLS
Two Way X-10 protocol power line carrier transceiver, 7 foot cable,
instrucons. Adds X-10 control to all HAI controllers.
10A09-7
Two Way X-10 Transceiver Kit 10A09-7
One branch ALC Hardwire Lighng Control Interface to control
Legrand ALC switches (1–31 lights). Four branch ALC Hardwire Lighng
Control Interface to control Legrand ALC switches (1–124 lights).
25A00-1
ALC Interface, 1 Branch
ALC Interface, 4 Branch
25A00-1
25A00-2
25A00-2
For 120/240V electrical systems, the Phase Coupler increases the
speed and reliability of the HLC system. Although the HLC protocol is
extremely robust and less suscepble to power line condions, HAI
recommends the use of a Phase Coupler in every installaon.
39A00-1
Case of 12
39A00-1CS
Phase Coupler (1)
Phase Couplers (12)
39A00-1
39A00-1CS
110
VAC
Serial interface, cable and UPB™ Powerline Interface Module to add
HLC to Omni LT.
36A10-1
HAI Lighting Control (HLC) Expansion Kit for Omni LT 36A10-1
110
VAC
UPB™ Powerline Interface Module (PIM) connects the lighng system
to an automaon system or computer, which can then control the
lights—making the system accessible through the home computer or
from a remote locaon over the Internet.
36A00-1
Case of 12
36A00-1CS
UPB™ Powerline Interface
Module with Cable (1)
UPB™ Powerline Interface
Modules with Cables (12)
36A00-1CS
36A00-1
110
VAC
www.homeauto.com
2 0 1 1 P R O D U C T C A T A L O G
Designed to repeat UPB™ signal in installaons requiring addional
signal strength. Must be used on a 120/240VAC split-phase 60Hz
powerline.
39A00-2
UPB™ Split-Phase Repeater 39A00-2
NEW
Required for use in three-phase installaons when UPB™ devices
are installed on separate phases. Must be used on a three-phase
120/208VAC delta-wye, 60Hz powerline.
39A00-3
UPB™ Three-Phase Repeater 39A00-3
NEW