FR www.blackanddecker.eu EN DE IT ES PT PW1300 C EL NL DA NO FI SV CS PL SL SK LT BG RU HU RO TR HR LV ET cod.
Lire ce manuel avant l’installation/utilisation du nettoyeur en faisant très attention aux INSTRUCTIONS POUR LA SÉCURITÉ Read this manual through carefully before installing/using the cleaner, paying special attention to the SAFETY INSTRUCTIONS Lesen Sie dieses Handbuch vor der Installation und dem Gebrauch des Hochdruckreinigers aufmerksam durch und achten Sie besonders auf die SICHERHEITSANWEISUNGEN Leggere questo manuale prima dell’installazione/uso dell’idropulitrice, prestando particolare attenzione
E3 E1 C3 B4 A1-A2-A3 B2 B1 C2 B5 C1 B6 B3 D 1
1 2 3 4 5 Ø13 6 2
E 3 D H 1 I 2 H H 4
E 5 1 ÷ 25 m Volt 2 x 1,5 mm 2 230 L1 S Z1 M 1~ NO 2 x 2,5 mm 2 T N C 25 ÷ 50 m NC S1 I S = Switch Z1 = Capacitor suppressor T = Thermal protection M = Motor S1 = Pressure switch
English 1 SAFETY INSTRUCTIONS 1.1 The appliance you have purchased is a technologically advanced product designed by one of the leading European manufacturers of high pressure pumps. To obtain the best performance from your unit, read this booklet carefully and follow the instructions each time you use the it. We congratulate you on your choice and wish you successful operation. 2.2.4 Before doing work on the appliance, remove the plug. Accidental start-up hazard 2.2.
12 English B2 Lance B3 Gun with safety catch B4 Power supply cable with plug B5 High pressure hose B6 Detergent tank (on models with this feature) 3 GENERAL INFORMATION (FIG.1) EN 3.1 3.2 Use of the manual This manual forms an integral part of the appliance and should be kept for future reference. Please read it carefully before installing/ using the unit. If the appliance is sold, the Seller must pass on this manual to the new owner along with the appliance.
English 6 ADJUSTMENT INFORMATION (FIG.3) 6.1 6.2 6.3 6.4 Water flow is adjusted by regulating the nozzle (E). Adjusting the detergent (on models with this feature) Detergent flow is adjusted using the regulator (F). Adjusting the detergent pressure 7.5 Set the adjustable nozzle on " " to deliver detergent at the correct pressure (on models with this feature). Adjusting the pressure (on models with this feature) The regulator (G) is used to adjust the working pressure.
14 English 9 TROUBLESHOOTING EN Problem Pump does not reach working pressure Possible causes Nozzle worn Water filter fouled Water supply pressure low Air being sucked into system Air in pump Pressure drops during use Adjustable nozzle not positioned correctly Water intake from external tank Intake water too hot Nozzle clogged Insufficient power supply Motor “sounds” but fails to start Voltage loss due to use of extension cable Appliance not used for a long period of time Problems with TSS device
