User manual

GasAlertMax

User Manual

The following table and figure illustrate how to replace a

sensor, pump, or pump filter. If the detector is activated,

deactivate the detector. Use a Phillips head screwdriver to

loosen and tighten any screws.

Do not use excessive force when removing or inserting the

sensor, or the sensor can be damaged. Gently rocking the

sensor back and forth can help free a tightly held sensor.

Insert the new sensor in the corresponding labeled

compartment.

Table 14. Replacing a Sensor, Pump, or Pump Filter

Item Description

1 Detector back screws

2 Sensor and pump cover

3 Pump filter window

4 Pump filter and o-ring

5 Pump

6 Sensors

Figure 5. Replacing a Sensor, Pump, or Pump Filter