Specifications

Accessories
Fiber Optic
Test Equipment
Patch Cords
Quality patch cords are vital to the success of optical power and/or link loss measurements, and ensure that test results are
accurate and reliable. Many patch cord options are available, depending upon application, fiber type, and connector style,
and can be added to an OWL test kit for a complete test solution. Patch cords are offered in 1 meter lengths only. Each patch
cord purchase is covered under a one-time, 30-day replacement policy. Use the selection template below to determine the
part number for your patch cords. Contact OWL at 262-473-0643 if you need assistance with choosing the correct patch cord
for your application.
Shown here:
singlemode ST-SC simplex
Part Number Example (shown above)
SM-ST-SC-S
PART NUMBER:
Simplex/
Duplex
[ ]
Connector
Side B
[ ]
Connector
Side A
[ ]
Fiber
Type
[ ]
- - -
M5 = 50/125 Multimode
M6 = 62.5/125 Multimode
SM = Singlemode
S = Simplex (1-fiber)
D = Duplex (2-fiber)
ST = ST/PC
SC = SC/PC
FC = FC/PC
SCA = SC/APC
ST = ST/PC
SC = SC/PC
FC = FC/PC
SCA = SC/APC
NOTE: singlemode patch cords generally have a yellow jacket, while multimode patch cords have an orange jacket.
NOTE: SC/APC connectors are only available with singlemode patch cords.
Due to the large amount of patch cord options, we request that you call OWL at 262-473-0643 for pricing and availability.
ORDERING INFORMATION
CONNECTOR STYLES
FC/PC
SC/APCSC/PC
ST/PC
Cleaning Supplies
Dirty patch cord connectors and equipment ports can cause unreliable test results, thus it is vitally important to keep them clean. Cleanliness is especially important for measuring Optical
Return Loss (ORL), where even the slightest amount of dirt can cause an air gap which will fail an ORL test. OWL offers cleaning supplies to ensure that patch cords and equipment ports are
clean, thus ensuring accurate and reliable tests.
The HUXCleaner pen-style in-adaptor ferrule cleaner is a new popular and innovative product designed for
cleaning inside connector ports. Models include a version for 2.5mm ports, and one for 1.25mm ports.
HUX-2 2.5mm HUXCleaner
HUX-1 1.25mm HUXCleaner
45.00
54.00
ORDERING INFORMATION
The OWL connector ferrule cleaner is used to clean the endface of a fiber optic connector; a few figure-8 strokes of the
connector on the cleaning tape is all that is needed to clean the connector.
FCC-1 OWL ferrule connector cleaner
FCC-R Tape refill for FCC-1
13.00
10.00
ORDERING INFORMATION
Fiber OWL / WaveSource Power Transformer
Fiber OWL series power meters and WaveSource light
sources come equipped with a charger port that can be used
for continuous wall operation or for recharging re-
chargeable 9V batteries. The power connector is 1.3mm.
NOTE: using this transformer while non-rechargeable
batteries are in the unit may produce an unsafe condition,
and may cause harm to the equipment or the user.
WS-9V-1.3 9V wall transformer (US only) 15.00
ORDERING INFORMATION
1.3mm
WaveTester Power Transformer
WaveTester series power meters come equipped with a
charger port that can be used for continuous wall operation
or for recharging re-chargeable 9V batteries. The power
connector is only for the 2.1mm port on the WaveTester.
NOTE: using this transformer while non-rechargeable
batteries are in the unit may produce an unsafe condition,
and may cause harm to the equipment or the user.
WS-9V-2.1 9V wall transformer (US only) 15.00
ORDERING INFORMATION
2.1mm