Specifications

18
HE6B Rectangular Three-position Enabling Switches
Specifications
Applicable Standards
IEC/EN60947-5-1
IEC/EN60947-5-8 (TÜV approved)
GS-ET-22 (TÜV approved)
UL508 (UL recognized)
CSA C22.2 No.14 (c-UL recognized)
Applicable Standards
for Use
ISO 12100/EN ISO 12100,
IEC 60204-1/EN 60204-1,
ISO 11161/EN ISO 11161,
ISO 10218-1/EN ISO 10218-1,
ANSI/RIA/ISO 10218-1,
ANSI/RIA/R15.06, ANSI B 11.19
ISO 13849-1/EN ISO 13849-1
Operating Temperature –25 to +60°C (no freezing)
Relative Humidity 45 to 85% RH (no condensation)
Storage Temperature –40 to +80°C (no freezing)
Pollution Degree
2 (inside panel, terminal side)
3 (outside panel, operator side)
Contact Resistance 50 m
Ω
maximum (initial value)
Insulation Resistance
Between live and dead metal parts:
100 M
Ω
minimum (500V DC megger)
Between terminals of different poles:
100 M
Ω
minimum (500V DC megger)
Impulse Withstand Voltage
1.5 kV (3 position switch)
2.5 kV (monitor switch)
Operating Frequency 1200 operations per hour
Mechanical Durability
Position 1
→
2
→
1: 1,000,000 operations minimum
Position 1
→
2
→
3
→
1: 100,000 operations minimum
Electrical Durability
100,000 operations minimum (rated load)
1,000,000 operations minimum
(24V AC/DC, 100 mA)
Shock Resistance
Operating extremes: 150 m/s
2
Damage limits: 500 m/s
2
Vibration Resistance
Operating extremes: 5 to 55 Hz, amplitude 0.5 mm
Damage limits: 16.7 Hz, amplitude 1.5 mm
Terminal Style Solder terminal
Applicable Wire 1 cable, 0.5 mm
2
maximum
Solder Terminal
Heat Resistance
310 to 350°C, 3 seconds maximum
Terminal Tensile Strength 20N minimum
Locking Ring Recom-
mended Tightening Torque
0.5 to 0.8 N·m
Degree of Protection IP65 (IEC 60529)
Conditional Short-circuit
Current
50A (125V): 3-position switch
(Use 120V/10A fast acting type fuse for short circuit
protection.) (IEC 60127-1)
50A (250V): monitor switch
(Use 250V/10A fast acting type fuse for short circuit
protection.) (IEC 60127-1)
Direct Opening Force 40N minimum (monitor switch)
Direct Opening Stroke
(when pressing the entire
button surface)
0.9 mm minimum (return monitor switch)
4.0 mm minimum (depress monitor switch)
Operator Strength
250N minimum
(when pressing the entire button surface)
Weight (approx.) 17g
Ratings
Rated Insulation Voltage (Ui) 125V (monitor switch: 250V)
Rated Thermal Current (Ith) 3A
Rated Voltage (Ue) 30V 125V 250V
Rated Current (Ie)
3-position switch
AC
Resistive Load (AC-12) — 0.5A —
Inductive Load (AC-15) — 0.3A —
DC
Resistive Load (DC-12) 1A — —
Inductive Load (DC-13) 0.7A — —
Return monitor
switch
Depress monitor
switch (NC)
AC
Resistive Load (AC-12) — 2A 1A
Inductive Load (AC-15) — 1A 0.5A
DC
Resistive Load (DC-12) 2A 0.4A 0.2A
Inductive Load (DC-13) 1A 0.22A 0.1A
Contact
Confi guration
3-position switch 2 contacts
Return monitor switch 0 to 1 contact
Depress monitor switch 0 to 1 contact
Minimum applicable load (reference value): 3V AC/DC, 5 mA•
(Applicable operation area depends on the operating conditions and load.)
Operating Characteristics
HE6B-M211
: ON (closed)
: OFF (open)
When releasing
the operator
When releasing
the operator
2
→
1
When pressing
the operator
Position
Travel (mm)
NO1-C1
NO2-C2
11-12
21-22
NO1-C1
NO2-C2
11-12
21-22
NO1-C1
NO2-C2
11-12
21-22
03.0
±0.3
2.3
±0.3
3.6
±0.5
4.0
±0.5
5.0
±0.5
Approx. 17N
Approx. 4N
(reference value)
(Without rubber boot)
(When pressing the center
of the operator)
Position 1 Position 2 Position 3
0.9
±0.3
Position
Position
1
→
2
→
3
3
→
1
Notes:
When a rubber boot is used, the operating force depends on the operating •
temperature.
The operating force to move the button from position 2 to position 3 can be •
changed. For details, contact IDEC.
Dimensions
47.7
6.6 19 13
4.2 6.8
24.6
5
11.3
29
5
11.3
22
15.6
10-0.5
2.5
3
4 4
16
Mounting Hole Layout
Mounting screws: M3 screw × 2•
(not attached and must be supplied
by the user)
Mounting screw length: 5 to 6 mm •
(panel thickness + gasket)
Panel Thickness: 6 mm maximum
2-ø3.2
16.2
±0.2
37.4
±0.2
29.4
±0.2
Mounting
Screws
All dimensions in mm.
UL ratings:
3-position switch:
125V AC/0.5A (Resistive)
30V DC/1A (Resistive)
Monitor switch:
250V AC/0.5A (General use)
30V DC/1A (General use)
TÜV ratings:
3 position switch:
AC-12 125V/0.5A
DC-12 30V/1A
DC-13 30V/0.7A
Monitor Switch:
AC-15 250V/0.5A
DC-13 125V/0.22A
DC-13 30V/1A
3-position switch (Note): 2 contacts•
Return monitor switch: 1 contact, terminal nos. 11-12•
Depress monitor switch: 1 contact, terminal nos. 21-22•
There are no terminal nos. 11-22 and 21-22 for HE6B-M200.•
Note: Use NO and C terminals for OFF
→ON→OFF 3-position switch
(NC terminal is not used.)
Terminal Arrangement (bottom view)
HE6B-M211
IDEC Mark
11
12
C1
NO1
NC1
21
22
C2
NO2
NC2