Specifications

16
HE5B ø16mm Round Three-position Enabling Switches
Grip Style Enabling Switch Housing
HE5B enabling switches can be installed in the HE9Z-GSH51
grip style enabling switch housing to be used as 3-position grip
style enabling switches.
Part No. Ordering No. Package Quantity
HE9Z-GSH51 HE9Z-GSH51 1
Specifi cations
Applicable Standards
IEC/EN 60529
UL50
Operating Temperature –25 to 60°C (no freezing)
Relative Humidity 45 to 85% RH (no condensation)
Storage Temperature –40 to 80°C (no freezing)
Pollution Degree 3
Shock Resistance Damage limits: 500 m/s
2
Vibration Resistance Damage limits: 5 to 55 Hz, amplitude 0.5 mm
Electric Shock Protection Class
Class II (when using HE5B-M2P∗)
Applicable Cable Outside diameter ø4.5 to 10 mm
Conduit Port Size
M16 (cable gland is supplied with the grip
style enabling switch housing)
Degree of Protection
IP65 (with HE5B-M2P∗)
NEMA type 4X indoor use only
(with HE5B-M2P∗)
Weight (approx.) 65g (grip style enabling switch housing only)
The above specifi cations are for the grip style enabling switch housing •
only. For enabling switch, see the HE5B specifi cations on page 14.
The following switches can be installed on the grip style enabling •
switch housing to be used as hand-held switches.
AB6M pushbuttons (IP65, except for AB6M-V)•
AS6M selector switches (IP65)•
AS6M key selector switches (IP65)•
Notes:
The HE9Z-GSH51 grip style enabling switch housing does •
not include the HE5B enabling switch. The enabling switch
must be ordered separately.
The HE5B enabling switch must be installed and wired to •
the HE9Z-GSH51 grip style enabling switch housing by the
user. For infor mation on wiring, see the instruction sheet
supplied with the HE9Z-GSH51.
Dimensions
92
(
78
)
38
144
Cable Gland
Part No. SKINTOP BS-M16 × 1.5 (LAPP)
39
HE5B Enabling Switch
(ordered separately)
HE9Z-GSH51
HE9Z-GSH51 + HE5B Construction
HE5B Enabling Switch (not supplied with the grip style enabling switch housing)
Locking Ring
Head
Housing
Cable Gland
Anti-rotation ring is not required when installing the HE5B enabling switch on the HE9Z-GSH51 •
grip style enabling switch housing. Use the locking ring only.
Mounting Bracket
50
20
33
81
Material: SUS304
Thickness: 3.0 mm
2-ø5.3
(For M5 mounting screws)
86
Plastic Coating
Part No: HE9Z-GH1
All dimensions in mm.