User Manual
10
gure G). Ensure screw threads rest on
screw carrier as shown.
screw head are fully engaged. (gure H)
internal magnet. Note:
head to be driven to its desired depth (gure I).
from damage.
Screw driving Notes:
LED LIGHT
spindle turning, place the forward / reverse selector (2) in the neutral position.
DRILLING
NOTE: When drilling, the bit may become disconnected from the spindle upon
the hex shank into the spindle and running the tool in the reverse direction.
GENERAL DRILLING TIPS
should be pulled out frequently when drilling to clear chips from the flutes.
but not so much as to stall the motor or deflect the bit.
TO START IT. DAMAGE TO THE TOOL CAN RESULT.
part of hole.
jamming.
WARNING: It is important to support work properly and to hold the tool firmly to prevent
loss of control which could cause personal injury.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement
parts.