yy @@ ÀÀ ;; @@ ÀÀ ;; yy CD400 KA175-374455 UK p01-12 1 16/3/00, 1:33 pm CD400 KA175 KA180 KA185 KA186 KA273 374455
Congratulations! On the purchase of your Black & Decker sander. To ensure the best results from your sander please read these safety and usage instructions carefully. If you have any questions or queries after reading this user manual please do not hesitate to call our Service and Information Centre, whose number you will find towards the back of this user manual, or one of our Authorised Repair Agents. A list of these Agents and further information is available on the Internet at www.2helpU.com.
Contents Page 4 Safety instructions Additional precautions to take when sanding paint and MDF Page 5 Personal safety Environmental safety Cleaning and disposal Double insulation Electrical safety Mains plug replacement Page 6 Extension cables Unwanted tools and the environment The Black & Decker guarantee After sales service for your Black & Decker product Our after sales service policy Accessories Technical data Features Page 7 Preparing your sander Fitting the sandpaper Dust extraction Page 8 Var
Sanders user manual SAFETY INSTRUCTIONS Warning! When using electric tools, the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Read all these instructions before attempting to operate the product and save this booklet. For safe operation: • Keep the work area clean. Cluttered areas and benches invite injuries. • Consider the work area environment. Do not expose the power tool to rain and do not use in damp or wet locations.
ENGLISH Any pre-1960 building may have been painted in the past with paint containing lead, and covered by additional layers of paint. It is important to determine whether the paint that is being sanded contains lead before beginning work. This can be done with lead test kits or by a professional decorator. If in doubt, we recommend the following precautions when sanding any paint or MDF.
ENGLISH Black & Decker service agent because special purpose tools are required. EXTENSION CABLES Up to 30m (100ft) of 3-core extension cable can be used without undue loss of power. Note: An extension cable should not be used unless absolutely necessary. Use of an improper extension cable could result in a risk of fire and electric shock. If an extension cable must be used, make sure it is properly wired, contains the correct rated fuse as recommended in its literature and is in good electrical condition.
ENGLISH 1. 2. 3. 4. 5. 6. On/off switch Paper clamp Dust extraction Sander base Handle Variable speed control Align the holes in the sandpaper with the dust extraction holes in the base of your sander. Your product includes some or all of these features. Note: This user manual also covers more than one catalogue number within this product group. Refer to your carton for details of your product.
ENGLISH Slide the cover of the dust extraction outlet forward and insert the nozzle of the dust extraction bag in the aperture. To empty the dust extraction bag, open the zip fastener and empty the contents. To remove the dust extraction bag, depress the release catch and remove the bag from the aperture. VARIABLE SPEED (KA185E/KA186E) The variable speed control on the front of your sander gives the optimum speed for every material.
CD400 KA175-374455 UK p01-12 9 16/3/00, 1:33 pm
Australia DeWalt Industrial Power Tool Company (Distributors of Black & Decker products) 7 Clarice Road, Box Hill, Victoria 3128 Tel: 03 9895 9200 Fax: 03 9899 7465 New Zealand Black & Decker 483 Great South Road Penrose, Auckland Tel: 09 579 7600 Fax: 09 579 8200 South Africa Black & Decker South Africa (Pty) Ltd Suite no 107, PostNet X65 Halfway House 1685 Tel: 011 314 4431 Fax: 011 314 4435 United Kingdom Black & Decker 210 Bath Road, Slough Berkshire SL1 3YD Tel: 01753 574277 Tlx: 848317 BAND
CD400 KA175-374455 UK p01-12 11 16/3/00, 1:33 pm RETAIN THIS CARD PURCHASERS’ STATUTORY RIGHTS CONDITIONS The Black & Decker Supplementary Guarantee does not apply in the following cases: • where the product has been used for trade or industrial purposes; • where any defect or failure is attributed to accident, misuse, abuse, negligence or non-observance of local regulations on the part of the owner or user; or • where the product has been serviced by a person not authorised by Black & Decker to do so
R AUSTRALIA / NEW ZEALAND DO NOT MAIL THIS CARD TO BLACK & DECKER. RETAIN THIS CARD IN CASE OF A CLAIM.
