UK Ireland Australia New Zealand
Intended use Your Black & Decker blower vac has been designed for leaf clearing. This tool is intended for consumer and outdoor use only. Safety instructions Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. X Read all of this manual carefully before operating the appliance. X Before operating the appliance, make sure that you know how to switch it off in an emergency.
Maintenance and storage X Before use, check the appliance for damaged or defective parts. Never operate the appliance with defective guards or shields, or without safety devices, for example debris collector in place. Check for misalignment and seizure of moving parts, breakage of parts, damage to guards and switches and any other conditions that may affect its operation. X Ensure that the appliance will operate properly and perform its intended function.
Features 1. Carrying strap 2. Speed control knob 3. On/off switch 4. Collection bag handle 5. Collection bag 6. Blow clamshell 7. Blow tube 8. Scraper 9. Vacuum tube - lower 10. Vacuum tube - upper 11. Locking ring 12. Release button 13. Powerhead Assembly Warning! Before assembly, make sure that the appliance is switched off and unplugged. Vacuum tube assembly (fig. A) The vacuum tubes must be assembled together before use. Warning! Do not operate the appliance with the vacuum tubes separated.
For vacuuming/shredding, the collection bag (5) must be fitted. Locate the bag rim (23) into the bag holder channel (25) making sure that the front of the bag is placed over the vacuum outlet (24) (fig. J). Slide the bag fully into the channel and press the latch (26) to lock the handle into the bag top (fig. K and L). Position the tube slightly above the debris/leaves.
X X To clean the appliance, use only mild soap and a damp cloth. Never let any liquid get inside the tool and never immerse any part of the tool into liquid. Do not use any abrasive or solvent-based cleaner. Self lubricating bearings are used in your product, therefore lubrication is not required. Mains plug replacement (U.K. & Ireland only) If a new mains plug needs to be fitted: Safely dispose of the old plug. X Connect the brown lead to the live terminal in the new plug.
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
$XVWUDOLD %ODFN 'HFNHU $XVWUDOLD 3W\ /WG )OHWFKHU 5RDG 0RRURROEDUN 9LFWRULD 1HZ =HDODQG %ODFN 'HFNHU 7H $SXQJD 3ODFH 0W :HOOLQJWRQ $XFNODQG 8QLWHG .
