GT340 GT350 GT360 GT460 SXC 1
Copyright Black & Decker 2
1 3 2 4 5 6 A 3
7 4 B D 4 C
ENGLISH HEDGETRIMMER GT340/GT350/GT360/GT460SXC CONGRATULATIONS! You have chosen a Black & Decker tool. Our aim is to provide quality tools at an affordable price. We hope that you will enjoy using this tool for many years. EC DECLARATION OF CONFORMITY GT340/GT350/GT360/GT460SXC Black & Decker declares that these products conform to: 98/37/EC, 89/336/EEC, 73/23/EEC, BS 2769 (EN 50144 not including 23.
ENGLISH General 1. Consider work area environment Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work area well lit. Do not use the tool where there is a risk of causing fire or explosion, i.e. in the presence of flammable liquids and gases. Keep the work area free from debris and obstacles. 2. Keep children away Do not allow children, visitors or animals to come near the work area or to touch the tool or mains cable. 3.
ENGLISH 18. Repairs This tool complies with relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user. ◆ Additional safety instructions for hedgetrimmers ◆ Wear safety glasses or goggles when operating this tool. Wear gloves when operating this tool. Wear ear protection when operating this tool. Immediately disconnect the cable from the mains if it is damaged or cut.
ENGLISH ◆ ◆ ◆ ◆ Only fit 13 Amperes BS1363A approved plugs fitted with the correctly rated fuse (1). The cable wire colours, or a letter, will be marked at the connection points of most good quality plugs. Attach the wires to their respective points in the plug (see above). Brown is for Live (L) (2), blue is for Neutral (N) (4).
ENGLISH Fitting your own extension cable ◆ When making your own extension cable, fit a 13 Amp plug to one end of the cable (see “Mains plug replacement”) and a female connector to the other end. For wiring instructions, see those supplied with the female connector. ◆ A male connector (see below) is already attached to the power supply cable on your tool. It is non-rewireable and should not be removed. If the connector is damaged and needs replacement, take the tool to a Black & Decker service centre.
ENGLISH Switching on and off (fig. A) For your safety, this tool is equipped with a double switching system. This system prevents starting the tool inadvertently and will only allow operation while holding the tool with both hands. Switching on ◆ Squeeze both the front handle switch (1) and the trigger switch (2). Switching off ◆ Release the front handle switch (1) or the trigger switch (2).
ENGLISH Technical data Voltage VAC (Australia & New Zealand) VAC Power input W (Australia & New Zealand) W Blade strokes (no load) min-1 Blade length cm Blade gap mm Blade brake time s Weight kg Voltage (Australia & New Zealand) Power input (Australia & New Zealand) Blade strokes (no load) Blade length Blade gap Blade brake time Weight GT340 230 240 400 3,700 40 16 < 0.5 2.3 VAC VAC W W min-1 cm mm s kg GT350 230 240 400 800 3,700 51 16 < 0.5 2.5 GT360 230 240 400 3,700 63 16 < 0.5 2.
GT340/GT350/GT351S/GT360S/GT41 134 141 142 135 136 134 132 130 114 116 119 131 147 143 101 102 JP 110 115 111 125 117 118 146 104 105 112 139 107 145 113 137 138 107 106 103 127 109 108 110 128 856 133 E13440 12 WWW.2helpU.com 24-10-02 129 TYP.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 Tel. 03-8720 5100 Fax 03-9727 5940 New Zealand Black & Decker 81 Hugo Johnston Drive Penrose, Auckland, New Zealand Tel. 09 579 7600 Fax 09 579 8200 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 16 376605-10 Tel.
