GL701 GL710 GL716 GL720 GL741
English (Original instructions) 4 A B C D 2
E F G H I J 3
Intended use Your Black & Decker trimmer has been designed for trimming and finishing lawn edges and to cut grass in confined spaces. This appliance is intended for consumer use only. Safety instructions Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. u Read all of this manual carefully before operating the appliance.
u u u u u u u u u u u u Never touch the cutting line while the appliance is running. Do not put the appliance down until the cutting line has come to a complete standstill. Use only the appropriate type of cutting line. Never use metal cutting line or fishing line. Be careful not to touch the line trimming blade. Take care to keep the mains cable away from the cutting line. Always be aware of the position of the cable.
u u u Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks. Impairment of hearing. Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF.) Use Warning! Let the tool work at its own pace. Do not overload. Setting the appliance to trimming or edging mode (fig. B - D) The appliance can be used in trimming mode as shown in fig.
- When the wound cutting line reaches the recesses (22), cut the line. - Temporarily park the line in the slots (23) on one side of the spool as shown. u Repeat the above procedure for the second cutting line on the lower section of the spool. Park the line in the unused slots (23). u Proceed as described above to fit the spool on the appliance. Do not forget to release the cutting line from the parking slots (23). Warning! Only use the appropriate type of Black & Decker cutting line.
EC declaration of conformity You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com Technical data Input voltage VAC Power input W No-load speed min-1 Weight kg GL701 TYPE 3-5 230 550 6,500 3.
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90552981 REV-0 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
