Specifications

9898

MA Lighting Technology GmbH

Dachdeckerstr. 16

D-97297 Waldbüttelbrunn

www.malighting.de eMail: info@malighting.de

4.64.6

4.6

Update PresetUpdate Preset

Update Preset

Press the EDIT button (LED is on).

Click on one of the Preset Buttons (the LED will blink, the preset button will display EDIT). The Preset

is called up, the used fixtures/channels are being selected and the values will be activated.

Enter your required modifications here.

If you want to change more than one preset, you can select another preset by pressing the EDIT button right after

the modification. Before you can actually change the new selected preset, a window will open, where you can save

the 1st preset by pressing the OK button or where you can cancel the modification by pressing CANCEL. The second

preset can only be called up after this.

Or:Or:

Or:

When executing sequences you can modify and save single values of presets directly.

Activate a cue, in which presets are to be modified. Now you can modify this cue by direct access (the UPDATE

button LED is on).

àà

3.4 3.4

3.4 Accessing fixtures directly /

3.53.5

3.5 Accessing Dimmer Channels directly

Press the Update button 1x.

The UPDATE window will open.

Press the UPDATE button.

A window appears, where you can either save the preset by pressing the OK button or cancel the

modification by pressing CANCEL.

1 By shortly pressing this button, you can switch between only original contents and add new contents.

Only original contents: When updating a preset, only those changes on Fixtures/Channels will be saved, which

have been used in this preset before.

Add new contents: When updating a preset, all changes on all Fixtures/Channels will be saved.

2 Pressing the Update Preset button will update that preset being displayed with a red background. You can select

another preset using the encoder.

Pressing the Update All Presets button will update all presets listed in the chart.

4.6 Update Preset