Specifications

9696
9696
96
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: [e-mail]
7 This button will bring you to the ASSIGN menu.
àà
àà
à
5.25.2
5.25.2
5.2 ASSIGN menu
8 Description/labelling of the encoders, located below the TFT display.
●
CHASE SPEED: The
individual individual
individual individual
individual speed can be set with this Encoder.
If one of the SPEED buttons 1 to 4 is pressed, you can set the speed of this SPEED group using
this Encoder.
SPEED SCALE: Pressing the CHASE SPEED encoder, this encoder will be switched to SPEED SCALE  now you
can set the division or doubling of the speed with this Encoder.
●
CHASE INFADE: Setting of the In-Fade time for FADE functions.
CHASE SPEED 1: When pressing the CHASE INFADE encoder, this encoder will be switched to CHASE SPEED 1 
now you can set the speed for this group with this Encoder.
●
CHASE OUTFADE: Setting the Out-Fade time for Dimmer Functions. (The OUTFADE time can be linked to the
infade time; The display shows INFADE).
CHASE SPEED 2: When pressing the CHASE OUTFADE encoder, this encoder will be switched to CHASE SPEED 2
 now you can set the speed for this group with this Encoder.
●
SNAP DELAY: Setting the delay time of SNAP functions.
CHASE SPEED 3: When pressing the SNAPDELAY encoder, this encoder will be switched to CHASE SPEED 3 
now you can set the speed for this group with this encoder.
Press the STORE button once. The changed Cue is now saved.
If the Cue is not to be seen on stage, activate the Blind function by pressing the BLIND button
(integrated LED is on).
Press the CLEAR button twice (Cue values will be deleted in the FIXTURE or CHANNEL window).
4.4.14.4.1
4.4.14.4.1
4.4.1
Modifying values of separate Chaser stepsModifying values of separate Chaser steps
Modifying values of separate Chaser stepsModifying values of separate Chaser steps
Modifying values of separate Chaser steps
 Select the Cue to be modified (red cell).
 Press the MODIFY CUE button (The Cue will be displayed with a green background).
 In the FIXTURE or CHANNEL window,
all values of the Cue will now be called up or displayedall values of the Cue will now be called up or displayed
all values of the Cue will now be called up or displayedall values of the Cue will now be called up or displayed
all values of the Cue will now be called up or displayed
(active, red)(active, red)
(active, red)(active, red)
(active, red). At the same time, this Cue will be put out on stage.
 This cue can now be modified by either direct access or presets.
à à
à à
à
3.4 3.4
3.4 3.4
3.4 Direct Access to Fixtures (in the FIXTURE
SHEET) /
3.53.5
3.53.5
3.5 Direct Access to Dimmer Channels (in the CHANNEL SHEET) and
3.7 3.7
3.7 3.7
3.7 Creating and calling up Presets
For modifying further Cues, select the respective Cue (Cue will be displayed on a green background).
Repeat all steps as described with the first cue and save with STORE.
àà
àà
à
4.3.4 4.3.4
4.3.4 4.3.4
4.3.4 Copying Cues
àà
àà
à
4.3.5 4.3.5
4.3.5 4.3.5
4.3.5 Moving Cues
àà
àà
à
4.3.6 4.3.6
4.3.6 4.3.6
4.3.6 Deleting and renumbering Cues
àà
àà
à
4.3.7 4.3.7
4.3.7 4.3.7
4.3.7 Inserting LOOPs
àà
àà
à
4.3.8 4.3.8
4.3.8 4.3.8
4.3.8 Inserting Macros
4.4 Editing Chasers