Specifications

ManualsBrandsBlack & Decker ManualsFood ProcessorFX1200

9090

MA Lighting Technology GmbH

Dachdeckerstr. 16

D-97297 Waldbüttelbrunn

www.malighting.de eMail: info@malighting.de

Status CopyStatus Copy

Status Copy

4.3.24.3.2

4.3.2

Changing the TRIGGER (Call-up) of individual Steps within the SequenceChanging the TRIGGER (Call-up) of individual Steps within the Sequence

Changing the TRIGGER (Call-up) of individual Steps within the Sequence

Select the respective cue within the TRIGGER column (red cell).

Enter the following with the left Encoder or via the keyboard and confirm with ENTER.

●

F: for FOLLOW mode

●

G: for GO button

●

S: for SOUND signal

●

No.: Automatically according to set time (e.g. if the set time is 1.5, this Cue will be called

up after 1.5 seconds automatically).

4.3.34.3.3

4.3.3

Changing the FADE or DELAChanging the FADE or DELA

Changing the FADE or DELA

Y times of individual steps within the SequenceY times of individual steps within the Sequence

Y times of individual steps within the Sequence

Select the respective cue (red cell).

Here, the duration for

thisthis

this cue can be changed globally with the BASIC-FADE TIME encoder.

Pressing the encoder BASIC-FADE TIME, you switch to IND.FADE (all additional individual FADE

times changed in the FIXTURE-Timing sheet). By turning the wheel, you can change these

times.

Pressing the encoder SNAP DELAY, you switch to DELAY TIME (all additional individual DELAY

times changed in the FIXTURE-Timing sheet). Byturning the wheel, you can change these

times.

Pressing the TRIGGER encoder will switch to BASIC OUTFADE. Here, you can modifiy the

durations by turning the Encoder.

If no FADE or DELAY times are indicated, no values are saved to this CUE.

4.3 Editing Sequences

4.3.44.3.4

4.3.4

Copying Cues Copying Cues

Copying Cues

Press the COPY Button once (LED is on).

Press the SEQUENCE Button once (LED is on).

Using the keypad, enter the number of the Sequence from which Cues are to be

copied.

Press the CUE Button once (LED is on).

Using the keypad, enter the number of the first Cue from which the copying is to start. If only one

Cue is to be copied, continue with the AT Button.

Pressing the + button will copy the respective Cue indicated by the following number.

Pressing the THRU button on the keypad will copy the Cues

from...tofrom...to

from...to (including last Cue).

When pressing the  button, the Cue with the next number will

notnot

not be copied.

Press the AT button once (LED is on).

Enter the new number for the copied Cues using the keypad.

Example: The Cues are to be inserted between Cue 10 and Cue 11. Number these Cues e.g. as 10.1

(possible Cue numbers are 10.001 - 10.999). This way, up to 999 Cues can be inserted

between two existing Cues.

Confirm with ENTER.

When copying

oneone

one Cue, the COPY window will open.

After pressing this button, you can choose between:

Only the values and times actually saved to this Cue Only the values and times actually saved to this Cue

Only the values and times actually saved to this Cue will be

copied. The history will be disregarded.

The Cue will be copied as it would actually be realized on stage. That means,

all previous steps will be taken into account and the result will be copied

afterwards.

Pressing COPY will copy the Cue, CANCEL will abort the process.

When copying more than one Cue,

only the values and times actually saved to this Cue only the values and times actually saved to this Cue

only the values and times actually saved to this Cue will be copied.

The history will be disregarded.