Specifications

8787
8787
87
Phone: [phone] Fax: -29
.
Hotline: [phone]Hotline: [phone]
Hotline: [phone]Hotline: [phone]
Hotline: [phone]
.
Users Manual grandMA Version 3.0
4.2.44.2.4
4.2.44.2.4
4.2.4
Calling sequences or chasers (Playback)Calling sequences or chasers (Playback)
Calling sequences or chasers (Playback)Calling sequences or chasers (Playback)
Calling sequences or chasers (Playback)
Using the EXECUTOR button, you can call up the saved Sequences directly.
If the green LED in the button is on, a Cue or a Sequence is saved on this button.
If the yellow LED is on or is flashing, this Cue, the Sequence or the saved Chaser is
activated.
The yellow LED indicates the beat of a Chaser or a Sequence.
Push up the respective Fader for the EXECUTOR faders to see the dimmer values.
Call up the Cue using the Go+ button (standard setting: button below the Fader). If
the green LED in the button above the Fader is on, a Cue or a Sequence is saved on
this button.
If the yellow LED is on or is flashing, this Cue, the Sequence or the saved Chaser is
activated. The yellow LED indicates the beat of a Chaser or a Sequence.
Using the PAGE buttons, you can additionally select other pages. Using the PAGE
buttons, you can additionally select other pages. à
5.45.4
5.45.4
5.4 PAGE Administration (PAGE)
With the Fader right to the EXECUTOR button, you can either set fixed fade times
or perform a fade-in manually when calling up Cues using the EXECUTOR buttons.
Press the button above the Fader once (red LED is on). Set the desired fade time
using the Fader. When selecting Cues using the EXECUTOR buttons, only the fade
time set here will be used (does also apply for SNAPDELAY times).
Press the button above the Fader again (green LED is on). Select the Cue using the
EXECUTOR button. Using the Fader, you can now fade to the selected Cue. Default
setting for the Fader to fade just upwards or in both directions
àà
àà
à
2.142.14
2.142.14
2.14 Settings in
the DEFAULTS menu below the Executor Defaults Crossfade.
4.1 Creating Cues (separate memories)
With the PREVIEW function, Cues in the FIXTURE SHEET or CHANNEL SHEET will be
displayed (without output to the DMX output).
Press the PREVIEW button once and call up the desired Cue using the EXECUTOR
button.