Specifications

8383
8383
83
Phone: [phone] Fax: -29
.
Hotline: [phone]Hotline: [phone]
Hotline: [phone]Hotline: [phone]
Hotline: [phone]
.
Users Manual grandMA Version 3.0
11
11
1
22
22
2
1 Press this button (selected button will receive dark-grey background colour):
●
Active Values: Save
onlyonly
onlyonly
only the
activeactive
activeactive
active values (all values in the FIXTURE/CHANNEL window which are
shown with a
red background colourred background colour
red background colourred background colour
red background colour).
●
All: Save
allall
allall
all momentary settings (all fixture and channel values).
●
All for Selected Devices:
All All
All All
All values of the
selectedselected
selectedselected
selected fixtures and channels are being saved (the fixture/channel
numbers will be marked in yellow).
For
thisthis
thisthis
this CUE, set the following parameters via the encoders:
●
TRIGGER: Call of the CUE by GO, SOUND, TIME or FOLLOW (i.e. after all previous durations have ended)
or automatically at a set point of time.
●
BASIC-FADE: CUE will be faded in with a set time; this is only possible with FADE functions.
àà
àà
à
2.82.8
2.82.8
2.8 Single
Channel-specific Adjustments for the Current Show (point 10) and
àà
àà
à
2.12.1
2.12.1
2.1
1 1
1 1
1 EDITING FIXTURES
(modify) (point 9)
●
SNAP DELAY: The values of the CUE will be called up with delay (only with SNAP functions).
●
OUTFADE TIME: Dimmer channels, which
become smallerbecome smaller
become smallerbecome smaller
become smaller in the next Cue, will be faded with the set
duration.
●
IND. FADETIME: All additional individual FADE times set in the FIXTURE Sheet.
●
IND. DELAYTIME: All additional individual DELAY times set in the FIXTURE Sheet.
Release the STORE button (LED stays on).
Cues can be saved on EXECUTOR faders or EXECUTOR buttons.
Define the assignment position of the Cue by pressing the EXECUTOR button once. When
saving to an EXECUTOR FADER, press a button above or below the fader once.
The CUE is now assigned to this EXECUTOR button or EXECUTOR fader and saved to the
Sequence Pool. This way it is possible, to assign the same Cue more often than once.
àà
àà
à
5.15.1
5.15.1
5.1
ASSIGN menu (Assignment to EXECUTOR)
Repeat all steps to create the next Cue.
Pressing the CLEAR button: once - will delete the selection, twice  will delete the active values and
reset all values then.
4.1 Creating Cues (separate memories)