Specifications
8080
8080
80
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: info@malighting.de
Manual FadeManual Fade
Manual FadeManual Fade
Manual Fade
Select the Fixtures or Dimmers, for which you want to call up a preset (Fixtures/Dimmers have to be displayed in
yellow). Now, the individual presets can be called up for the selected Fixtures. The called-up presets and their names
will be displayed in the FIXTURE windows.
If you select a preset directly, without having selected Fixtures or Dimmer channels, all Fixtures and Dimmers, for
which presets had been created, will be selected. The preset can now be called up by pressing the respective button.
Using the Fader next to the right display, you can either define Preset Fade times or fade over
presets manually.
Press the button above the Fader once (red LED is on). Select the desired Fade time using the Fader.
The selected Fade time will be used when presets are being called up.
Press the button above the Fader once more (green LED is on). Select your Presets. With the Fader,
you can now fade over
towards the selected Preset. Default setting for the Fader to fade just
upwards or in both directions
àà
àà
à
2.142.14
2.142.14
2.14 Settings in the DEFAULTS menu below the Executor
Defaults Crossfade.
3.7.33.7.3
3.7.33.7.3
3.7.3
Calling up PresetsCalling up Presets
Calling up PresetsCalling up Presets
Calling up Presets
3.7.43.7.4
3.7.43.7.4
3.7.4
FREEZE FunctionFREEZE Function
FREEZE FunctionFREEZE Function
FREEZE Function
By activating the FREEZE function, called-up Presets can be locked. As long as the FREEZE Function is switched on,
the called-up preset can not be overwritten by any Cues, Sequences or Chasers.
Press the FREEZE button once (LED is on).
Select a Preset the selected Preset will be activated and can no longer be modified by Cues,
Sequences or Chasers.
In order to deactivate the FREEZE function, press the FREEZE button once more (LED is off).
3.7 Creating and calling up Presets
3.7.23.7.2
3.7.23.7.2
3.7.2
Copying PresetsCopying Presets
Copying PresetsCopying Presets
Copying Presets
Press the COPY button once (LED is on).
Select the Preset Buttons in the respective PRESET Window. By selecting various presets,
several presets can be copied at the same time.
Press AT button 1x (LED is on).
Click on the position for the copied presets in the PRESET Window.
Press the ENTER button once.
à 3.4.2 Pause Function