Specifications

ManualsBrandsBlack & Decker ManualsFood ProcessorFX1200

MA Lighting Technology GmbH

Dachdeckerstr. 16

D-97297 Waldbüttelbrunn

www.malighting.de eMail: info@malighting.de

1.51.5

1.5

Safety Requirements (Important, read carefully!)Safety Requirements (Important, read carefully!)

Safety Requirements (Important, read carefully!)

1.5.11.5.1

1.5.1

TouchscreenTouchscreen

Touchscreen

Never use any sharp items when operating the touchscreens! Deep scratches will damage the screen. During

operation it might happen that due to temperature fluctuations the calibration of the touchscreens will change, so

that a new adjustment will be necessary.

àà

2.132.13

2.13 Settings in the Setup Menu (point 1)

1.5.21.5.2

1.5.2

Sockets for keyboard and mouseSockets for keyboard and mouse

Sockets for keyboard and mouse

These sockets are located on the back side of the unit and are very delicate; especially during transport, take care

that these parts are not exposed to mechanic stress.

1.5.31.5.3

1.5.3

Transportation/CaseTransportation/Case

Transportation/Case

During transport, take care that the touchscreens are not exposed to mechanical stress. Flightcases not provided by

MA Lighting have to be designed in a way that

under no circumstancesunder no circumstances

under no circumstances pressure can be exerted on the TFT

displays.

1.5.41.5.4

1.5.4

anel anel

anel (grandMA only)

If the mechanical parts of the display panel have not been moved for a while (about one day), it might occur that

you will feel a stronger resistance when starting to change the angle. This is just normal and related to the

mechanics.

1.5.51.5.5

1.5.5

Battery Battery

Battery (not on the ultra-light)

In case of power failure, the console offers (with fully charged battery) an emergency backup of at least 10 minutes.

In case of a longer power failure, the console will automatically switch off after approximately another 3 minutes

or another 12 minutes when pressing CONTINUE. If

this case occurs this case occurs

this case occurs, the console will

automatically save automatically save

automatically save

all dataall data

all data.

When switching off the unit via

built-in power switchbuilt-in power switch

built-in power switch, all data of the current show are saved automatically.

In case of an automatic switch-off after power failure (described above), the unit must be running again for

atat

leastleast

least 10 minutes, in order to guarantee a proper SAVE procedure the next time the unit is switched off.

ByBy

ignoring this advice the harddisk will be damaged.ignoring this advice the harddisk will be damaged.

ignoring this advice the harddisk will be damaged.

The battery needs approximately 48 hours for a full recharge. Only then the battery is able again to bridge another

power failure of up to 10 minutes.

According to manufacturer provisions, the battery has to be changed

after 5 years at latest after 5 years at latest

after 5 years at latest. Please attach a

label on the unit, indicating the date of purchase, preferably update data etc. (choose a location, where this

information can easily be seen). (This manual was printed in the year 2001.)

1.5.61.5.6

1.5.6

HarddiskHarddisk

Harddisk

During operation, do not push or knock the unit.

Although the built-in notebook harddisk is secured by a rubber-upholstery, mechanical stress can still damage the

unit and lead to e.g. a complete loss of data.

1.5.71.5.7

1.5.7

HousingHousing

Housing

 Do not block or cover the ventilation. On hot summer days, the lid (grandMA only) should be at least 5 cm open

to ensure sufficient ventilation.

 Do not place any drinks on the unit.

 Do not use force when adjusting the viewing angle of the display panel (grandMA only).

1.5 Safety Requirements