Specifications

7878
7878
78
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: [e-mail]
33
33
3
3.73.7
3.73.7
3.7
Creating and calling up PresetsCreating and calling up Presets
Creating and calling up PresetsCreating and calling up Presets
Creating and calling up Presets
There are certain values for the functions of fixtures, which will be needed again and again, for example the values
for individual colours of the color wheel. These values can be programmed as presets in the respective PRESET
window and can here be called up again.
If you have presets for the fixtures be created automatically (CREATE PRESETS), these pre-recorded presets will be
available in the respective windows.
àà
àà
à
2.102.10
2.102.10
2.10 Creating Presets, Effects and Group buttons automatically
1 Create a window for all functions for which presets are to be used and position it on a display.
2 In the GROUP window, select those fixtures, for which you want to create a Preset, by a simple touch or mouse click
(fixtures have to be displayed in yellow in the FIXTURE window).
3 On the display, select the Preset group, for which you want to create a Preset, using the Touchscreen or by a left
mouse click on the title bar, for example: In the Preset window PAN/TILT.
Values and positions can be changed by:
●
Encoders (all functions and the assignment will be displayed on the right display above the encoders),
●
Trackball (only PAN /TILT), if activated,
●
Wheel (only for dimmer values),
●
Middle mouse button (click on a value in the FIXTURE or CHANNEL window and hold it; the value will be changed
by moving the mouse while holding the middle mouse button).
●
Switch on the Trackball by pressing the TRACKBALL ON button (the integrated LED must be on).
Now you can control the selected fixtures via the trackball (PAN/TILT) . Changed (active) values
will be displayed in the OUTPUT window by a red background colour.
3.7 Creating and calling up Presets