Specifications

6565
6565
65
Phone: [phone] Fax: -29
.
Hotline: [phone]Hotline: [phone]
Hotline: [phone]Hotline: [phone]
Hotline: [phone]
.
Users Manual grandMA Version 3.0
11
11
1
22
22
2
33
33
3
3.4.3.4.
3.4.3.4.
3.4.
33
33
3
FADE and DELAFADE and DELA
FADE and DELAFADE and DELA
FADE and DELA
Y times in the FIXTURE windowY times in the FIXTURE window
Y times in the FIXTURE windowY times in the FIXTURE window
Y times in the FIXTURE window
AdditionallyAdditionally
AdditionallyAdditionally
Additionally to the standard (Basic) FADE and DELAY times, individual durations can also be set for the individual
functions in the FIXTURE window.
You will need these settings when creating Cues, in order to be able to work with different FADE or DELAY times for
individual functions.
1 Press the FADE or DELAY button (switching on the control bar
à à
à à
à
3.4.73.4.7
3.4.73.4.7
3.4.7 Options in the Fixture window).
Or:Or:
Or:Or:
Or:
If the AUTO button is pressed (on the control bar or in the options, Switching on the Control bar.
àà
àà
à
3.4.7 3.4.7
3.4.7 3.4.7
3.4.7 Options in the Fixture window), when pressing the TIME button once, the fixture sheet will
switch to
FADEFADE
FADEFADE
FADE time mode. The second time, the fixture sheet will switch to DELAY time mode.
If the AUTO button is not pressed, the display will not switch over. The currently selected FADE or
DELAY function will be displayed by an arrow on the Command Line control bar.
àà
àà
à
99
99
9 Command Line
2 Choose a function, where you wish to program a time, other than the Basic time. You will find a button for each
function, displayed above the Encoder descriptions. By pressing these buttons (buttons will turn dark-grey), you can
select, which functions shall be affected by the change.
The various function groups can be selected by pressing the FEATURE button.
Using the SELECT/DESELECT button or by pressing the encoder on the right, you can either select all buttons (dark
grey) or erase them (light grey).
Now you can modify the IND. FADE time or IND. DELAY time (individual Fade/Delay Times) for the selected fixtures
using the left encoder.
Pressing the button PUSH FOR DELAY/FADE or pressing the second Encoder you can switch between IND. DELAY
time and IND. FADE time.
3.4 Accessing Fixtures directly (in the FIXTURE SHEET)