Specifications

6363
6363
63
Phone: [phone] Fax: -29
.
Hotline: [phone]Hotline: [phone]
Hotline: [phone]Hotline: [phone]
Hotline: [phone]
.
Users Manual grandMA Version 3.0
You can also delete activated values of entire function groups of selected fixtures (Output will be set to Default of
activated cue value).
If you wish to modify the selection
oror
oror
or the activated values of the fixtures:
●
Press the CLEAR button:
When pressing the CLEAR button the
firstfirst
firstfirst
first time, the selection of fixtures will be deleted from the
OUTPUT window (yellow characters turn grey).
●
Press the CLEAR button again:
When pressing the CLEAR button the
secondsecond
secondsecond
second time, the activation of modified values will be
canceled (red background).
●
Press the CLEAR button one more time:
When pressing the CLEAR key the
third third
third third
third time, all modified values will be reset (default or to their
original setting prior to the activation).
After pressing the CLEAR button for the first time, the yellow LED in this button will flash. This means that only
the selection was deleted. When you select other fixtures or dimmer channels now, the yellow LED will not
flash anymore.
3.4 Accessing Fixtures directly (in the FIXTURE SHEET)
The
modifiedmodified
modifiedmodified
modified values will be kept and displayed with red background.
3.4.13.4.1
3.4.13.4.1
3.4.1
The ALIGN FunctionThe ALIGN Function
The ALIGN FunctionThe ALIGN Function
The ALIGN Function
The ALIGN function allows you to use four different
modes modes
modes modes
modes of changing values.
ALIGN button pressed once (LED is on).
When changing activated values, the value of the first selected Channel/Fixture will be taken as
starting value (will not be changed), while the value of the last selected Channel/Fixture value will be
the one modified most, and all values in between will be distributed evenly.
ALIGN button pressed twice (LED is on).
When changing activated values, the last value of the last selected Channel/Fixture will be taken as
first value (will not be changed), while the value of the first selected Channel/Fixture will be the one
modified most, and all values in between will be distributed evenly.
ALIGN button pressed 3 times (LED is on).
When changing activated values, the value of the selected Channel/Fixture value in the middle will
be taken as first value (will not be changed). The value of the first and last selected Channel/Fixture
will be the ones modified most, and all values in between will be distributed evenly.
You can also delete activated values of single fixtures (Output will be set to Default or activated cue value).
Press OFF button 1x (LED is on).
Click on the activated value in the Fixture Sheet.
Press a button for the respective function on the Preset Control Bar or click on that function within
the Fixture Sheet.
The selection of single fixtures can also be deleted.
Press OFF button 1 x (LED is on).
Click on the Fixture button in the Group Window or on the Fixture Name in the Fixture Sheet.
ALIGN button pressed 4 times (LED is on).
When changing activated values, the middle value will be the one modified most, the values on the
left and right will not change, and the values in between will be distributed evenly.
Press OFF button 1x (LED is on).