Specifications

ManualsBrandsBlack & Decker ManualsFood ProcessorFX1200

4343

Phone: +49 931 49794- 0 Fax: -29

Hotline: +49 5251 688865-99Hotline: +49 5251 688865-99

Hotline: +49 5251 688865-99

Users Manual grandMA Version 3.0

DISABLED:

FaderFader

Fader

without fwithout f

without f

unun

tiontion

tion

Executor Faders: When switching between the Pages, the saved values will be called up, but the

Faders will not follow.

Channel Faders: Faders do not adjust automatically to the called-up values of the assigned channels.

8 To switch the wheels functions for the dimmers.

Additiv: All dimmer values will be changed simultaneously. If they reach 0 or FF, they will be aligned.

Incremental: All dimmer values will be changed simultaneously. If they reach 0 or FF, the respective intervals

will be maintained.

Prop.+: All dimmer values will be changed in percentages and will reach 0 simultaneously.

Prop.: All dimmer values will be changed in percentages and will reach FF simultaneously.

Please note, that with PROP+ a change of the value 0 is not considered a change.Please note, that with PROP+ a change of the value 0 is not considered a change.

Please note, that with PROP+ a change of the value 0 is not considered a change.

Please note, that with PROP a change of the value FF is not considered a change.Please note, that with PROP a change of the value FF is not considered a change.

Please note, that with PROP a change of the value FF is not considered a change.

9 To switch between Light and Dark display background illumination.

10 The desk lamp can be switched either on or off with the ON/OFF button. The brightness of the desk lamp can be

changed using a left mouse click on the blue bar or using the touchscreen.

11 By pressing this button, you will enter the DEFAULTS menu. All general presets can be set in this menu.

àà

2.142.14

2.14

Settings in the DEFAULTS menu

12 By pressing this button you will enter the DATE and TIME menu.

àà

2.172.17

2.17 DATE and TIME

13 By pressing this button you can change the display language.

14 By pressing this button, you will open the OOPS Function Options menu

àà

belowbelow

below

15 To switch the screen saver off an on. By pressing the button briefly, a window will appear where you can select the

time after which the screen saver is supposed to kick in.

16 By pressing this button, you will reach the UPDATE SOFTWARE menu. The operating system, the operating software

as well as the console software and the fixtures can be updated from this menu.

àà

1010

10 Software Update

17 To leave the SETUP menu.

2.13.1 OOPS Function Options2.13.1 OOPS Function Options

2.13.1 OOPS Function Options

If the OOPS function is activated, the old setting will always be saved additionally when executing commands or

entering values. This requires many resources slowing the console down. As the execution of programs may be

compromised thereby, this option can be switched off completely or for specific functions.

2.13 Settings in the Setup Menu

General: If the button is on Enabled, all OOPS functions are available  except those for the VIEWS

commands or entries in the PROGRAMMER (which can be switched off separately; for

further information see below). Pressing the Enabled button next to General will switch it

over to Disabled and all OOPS functions will be switched off.

Oops for Views: If the button is on Enabled, OOPS functions can be used for VIEWS calls and creating or

deleting VIEWS buttons. Pressing the Enabled button will switch it to Disabled and the OOPS

function can no longer be used for VIEWS commands.

Oops for Programmer: If the button is on Enabled, the OOPS function is available for entries in the PROGRAMMER

(selecting/deselecting or activating/deactivating Fixture or Dimmer channels). Pressing the

Enabled button will switch it to Disabled and the OOPS function can no longer be used for

entries in the PROGRAMMER.

Pressing the CLOSE button will close the menu and save the settings.