Specifications
3232
3232
32
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: info@malighting.de
11
11
1
11
11
1
11
11
1
22
22
2
1313
1313
13
11
11
1
44
44
4
99
99
9
88
88
8
77
77
7
11
11
1
00
00
0
44
44
4
11
11
1
22
22
2
55
55
5
33
33
3
66
66
6
This menu will only display the actually patched channels. All changes made
herehere
herehere
here will
onlyonly
onlyonly
only affect the
current showcurrent show
current showcurrent show
current show!
1 This column will show the
individualindividual
individualindividual
individual, addressed DMX channel.
2 Name of fixtures and dimmer channels assigned to the individual DMX channels.
3 Number of fixtures and dimmer channels.
4 Functions of the individual DMX channels.
5 In this column, a profile can be assigned to this cannel.
àà
àà
à
2.92.9
2.92.9
2.9 Creating, Assigning and Deleting Profiles
Using these profiles, you can also define min and max values.
6 Within this column, the respective DMX channel can be inverted. A right mouse click into the cell will activate this
function. An inverted channel will be indicated by a YES in the respective cell.
7 DEFAULT: This value will be called up if no CUE, Sequence, Preset or Direct Access addresses the fixture or dimmer
channel.
This setting can be used for example for PAN/TILT, in order to have the preset of the light beam in the center. These
values can be set by selecting the respective cell with a right mouse click. The requested value can be entered
within the activated window.
8 The HIGHLIGHT function is used to create a light beam fast and easily during the procedure of programming
positions of the selected fixtures. The values for individual DMX channels have to be set respectively. These values
can be set by selecting the respective cell with a right mouse click. The requested value can be entered within the
activated window.
9 SNAP: New value will be activated fastest possible (jumps, does not fade: default setting). Activate by a right mouse
click on the cell. A YES in the respective cell will indicate that SNAP has been chosen for this channel.
Basic setting for the respective DMX channel is FADE.
2.82.8
2.82.8
2.8
Single Channel-specific Adjustments for the Current ShowSingle Channel-specific Adjustments for the Current Show
Single Channel-specific Adjustments for the Current ShowSingle Channel-specific Adjustments for the Current Show
Single Channel-specific Adjustments for the Current Show
Press the DMX LIST button in the PATCH menu to activate this menu.
2.8 Single Channel-specific Adjustments for the Current Show