Specifications
3131
3131
31
Phone: +49 931 49794- 0 Fax: -29
.
Hotline: +49 5251 688865-99Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
.
Users Manual grandMA Version 3.0
55
55
5
66
66
6
2.7.32.7.3
2.7.32.7.3
2.7.3
ARTNET DMX-ETHERNET-CONFIGURATIONARTNET DMX-ETHERNET-CONFIGURATION
ARTNET DMX-ETHERNET-CONFIGURATIONARTNET DMX-ETHERNET-CONFIGURATION
ARTNET DMX-ETHERNET-CONFIGURATION
From software version 2.10 and later DMX hubs of the company Artistic Licence can be used. It is now
possible, to connect up to 16 DMX hubs. On the DMX hubs, unique SUB NET addresses have to be designated
accordingly. The address switches of the individual DMX sockets have to be set to four different addresses.
If DMX hubs are connected, they will be searched for and displayed in the chart when calling up this menu. If
the hub is being activated after opening the menu, you can search for the hub by pressing the
Scan ofScan of
Scan ofScan of
Scan of
ArtNet NodesArtNet Nodes
ArtNet NodesArtNet Nodes
ArtNet Nodes button to insert the hub in the chart, if one is found.
5 In the left chart, all hubs found will be displayed with the respectively set address for each DMX OUTPUT. The
number in front of the colon is the SUBNET address, the number following is the address for the DMX OUTPUT.
Choose an address for the DMX OUTPUT.
6 In the right chart, one line is displayed for each hub. The selected DMX OUTPUT will be displayed on a green
background.
If an output is displayed on a red background, this indicates that it is already being assigned and can not be used.
In the SHORT NAME column, you can enter a name for each hub using the keyboard.
Press the SAVE button. Now, the hub for this DMX port is configured and the menu will be closed.
If further ports are to be assigned, repeat steps 2 to 6. When all settings are completed, press the SAVE button in the
DMX-OUTPUT CONFIGURATION menu. The modified settings are now saved. Now, the blue ACTIVE LED at the
assigned DMX hub is on and the DMX outputs can be used. When data is received, the red LED on the DMX hub is on.
2.7 DMX Output and Ethernet Configuration